Body Width (In.) | 0.625 in |
Dimension F | 0.25 in |
Static Load Capacity (Lb.) | 600 lb |
Dimension D | 1.05 in |
Lubrication | No Lubrication System |
Bolt Size | #6 |
Temp. Range (F) | 0 - 400 |
Accelerated Speed | 14 fps |
Dimension G | 0.625 in |
Steady State Speed | 5 fps |
Overall Height (In.) | 1.05 in |
Mounting Surface to Shaft Center (In.) | 0.687 in |
Dimension I | 0.75 in |
Dimension H1 | #6 |
Dimension H | 0.1563 in |
Dimension E | 1.125 in |
Mounting Hole Dia. (In.) | 0.1563 in |
Overall Width (In.) | 0.5 in |
Flange Thickness (In.) | 0.25 in |
Overall Length (In.) | 1.5 in |
Mounting Hole Dia. (mm) | 0.156 in |
Dimension A | 0.687 in |
Bore Dia. (In.) | 0.25 in |
Liner | Frelon(TM) Gold |
Dimension B | 1.5 in |
Dynamic Load Capacity (Lb.) | 600 lb |
Dimension C | 0.5 in |
Item | Mounted Linear Bearing |
Material | Aluminum |
Type | End Support Block |
For Use With | Linear Shafting |
Flange Width | 0.5 in |
Nominal Inside Diameter | 0.25 in |
Flange Thickness | 0.25 in |
Number of Mounting Holes | 2 |
Top Length | 0.5 in |
Mounting Hole Center to Center Distance | 1.125 in |
Series | Dayton |
Maximum Operating Temperature | 400 Degrees F |
System of Measurement | Inch |
Minimum Operating Temperature | 0 Degrees F |
Finish | Anodized |
Construction | Anodized Aluminum |
Country of Origin (subject to change) | China |
Package Quantity | 1 |
Shaft Support, 0.250 In Bore, 1.050 In H, DAYTON, Mfr# 2CNU5
$46,75
Free shipping will be applied on orders over $50
Mounted Linear Bearing, Bolt Size #6, Finish Anodized, Flange Thickness 0.25 in, Flange Width 0.5 in, For Use With Linear Shafting, Material Aluminum, Maximum Operating Temperature 400 Degrees F, Minimum Operating Temperature 0 Degrees F, Mounting Hole Center to Center Distance 1.125 in, Mounting Hole Dia. (mm) 0.156 in, Mounting Surface to Shaft Center (In.) 0.687 in, Nominal Inside Diameter 0.25 in, Number of Mounting Holes 2, Overall Height (In.) 1.05 in, Series Dayton
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.