| Property | Value |
|---|---|
| Item | Linear Shaft |
| Shaft Dia. | 1/2 in |
| Length | 24 in |
| Material | Carbon Steel |
| Type | Both Ends Tapped Shaft |
| Dimension L | 24 |
| Thread Length (In.) | 0.5 in |
| Min. Surface Hardness | 60 RC |
| Travel Length (In.) | 24 in |
| For Use With | Slide/Sleeve Bearing |
| Mounting Hole Center to Center | Not Applicable |
| Mounting End Dia. (In.) | 0.5 in |
| Dia. Tolerance Max. | 0.4998 in |
| Dimension B | 0.5 in |
| Dimension M | 1/4-20 |
| Thread Size | 1/4 |
| Dia. Tolerance Min. | 0.4993 in |
| Temp. Range (F) | 230 Degrees F |
| System of Measurement | Inch |
| Surface Roughness | 16 uin |
| Diameter Tolerance Class | g6 |
| Min. - Max. Shaft Diameter | 0.4993 in - 0.4998 in |
| Weight Per Meter | Not Applicable |
| Shaft Type | Both Ends Tapped Shaft |
| Diameter | 1/2 in |
| End Type | Both Ends Tapped |
| Mounting Hole Thread Size | Not Applicable |
| Surface Hardness - Minimum | 60 HRC |
| Diameter Tolerance - Maximum | 0.5 in |
| Mounting Hole Center to Shaft End | Not Applicable |
| Roughness | 0.4 um Ra |
| Number of Mounting Holes | Not Applicable |
| Mounting Hole Diameter | Not Applicable |
| Operating Temperature - Maximum | 230 Degrees F |
| End Thread Length | 0.5 in |
| Overall Length | 24 in |
| End Thread Diameter | 0.25 in |
| Mounting Hole Type | Not Applicable |
| Core Type | Solid |
| Series | SFW |
| Diameter Tolerance - Minimum | 0.499 in |
| End Thread Size | 1/4-20 |
| Tolerance Class | g6 |
| Country of Origin (subject to change) | Italy |
| Package Quantity | 1 |
Shaft, Steel, 0.500 In D, 24.00 In, Nb, Mfr#: SFW8X24FS103
$47.29
Free shipping will be applied on orders over $50
Linear Shaft, System of Measurement Inch, Diameter 1/2 in, Shaft Type Both Ends Tapped Shaft, End Type Both Ends Tapped, Core Type Solid, Overall Length 24 in, Surface Hardness - Minimum 60 HRC, Material Carbon Steel, End Thread Size 1/4-20, Mounting Hole Thread Size Not Applicable, Diameter Tolerance - Minimum 0.499 in, Diameter Tolerance - Maximum 0.5 in, Mounting Hole Center to Center Not Applicable, Mounting Hole Center to Shaft End Not Applicable, End Thread Length 0.5 in
9999 in stock
Subtotal:
$47.29
You must be logged in to post a review.
Reviews
There are no reviews yet.