Item - Relay
Solid State Relay
Input or Control Voltage
90 to 280V AC
Output or Controlled Voltage Range
48 to 660V AC
Relay Turns On At
Zero Crossing
Mounting - Relay
Through Panel
Input Voltage
90 to 280V AC
Body Width - Relay
1.75 in
Overall Height - Relay
2.32 in
Body Depth - Relay
1.35 in
Standards
CE Certified, CSA C22.2 No 14-13, CSA Certified, EAC, EN/IEC 60950-1, EN/IEC 62314, UL 508, UL Listed
Body Height - Relay
2.32 in
Insulation Resistance
1,000 megaohm
Electrical Connection
Screw Clamp
Maximum Output Current without Heat Sink
Not Recommended
Dielectric Strength
4,000V AC
Status Indicator
Green LED Indicator
Series
Harmony(TM) SSP Series
Output Switching Mode
Zero Crossing
Minimum Switching Voltage
90V AC
Maximum Output Current with Heat Sink
90 A
Maximum Switching Voltage
10V AC
Minimum Operating Temperature
-40 Degrees F
Output Voltage Range
48 to 660V AC
Maximum Operating Temperature
176 Degrees F
Maximum Horse Power Rating
1.5 hp 120 V AC || 3 hp 240 V AC || 7.5 hp 480 V AC
Capacitance Unbalance
8 pF for input/output
Surge Current
1200 A 16.6 ms
Ip Degree Of Protection
IP20
Output Voltage
48 to 660 V AC
Input Current Limits
5-10 mA
Maximum I²T For Fusing
5976 A².s for 8.33 ms at 60 Hz || 6560 A².s for 10 ms at 50 Hz
Absolute Maximum Voltage
1200 V
Maximum Voltage Drop
u003c1.15 V on-state
Ambient Air Temperature For Storage
-40-125°C
Maximum Leakage Current
1 mA off-state
Dv/Dt
500 V/µs off-state at maximum voltage
Thermal Resitance
0.27°C/W junction to case
Local Signalling
LED, green input
Solid State Output Type
SCR output || zero voltage switching
Product Or Component Type
solid state relay up to 125 A
Tightening Torque
1.5 to 1.7 N.m for input || 2 to 2.2 N.m for output
Marking
EAC || UL || CSA || CE
Ambient Air Temperature For Operation
-40-80°C
[Uc] Control Circuit Voltage
90 to 280 V AC
[Uimp] Rated Impulse Withstand Voltage
6 kV output to case || 6 kV input to output
Cos Phi
0.5-0.5 (with maximum load)
Product Certifications
UL || EAC || CSA || CE
Connections - Terminals
screw terminals 0.2 to 3.3 mm², AWG 24 to AWG 12) with cable end input || screw terminals 0.5 to 5.26 mm², AWG 20 to AWG 10) with cable end output || screw terminals 0.2 to 3.3 mm², AWG 24 to AWG 12) without cable end input || screw terminals 0.5 to 8.26 mm², AWG 20 to AWG 8) without cable end output || forked type tag connectors 9.2 x 4 mm input || ring lugs 9.2 x 4 mm input || forked type tag connectors 11.7 x 4.5 mm output || ring lugs 11.7 x 4.5 mm output
Protection Device Type
type 1 - 63 A miniature circuit breaker (MCB) B || type 2 - 50 A miniature circuit breaker (MCB) B
Country of Origin (subject to change)
Mexico
