| Item | Stepper Motor |
| Phase | 5 |
| Frame Size | NEMA 34 / 85mm |
| Shaft Type | Geared Shaft |
| Max. Holding Torque | 19.61nm / 2777.48 oz-in |
| Amps Per Phase | 1.4 |
| Rotor Inertia | 2,700 g/sq cm |
| Shaft Dia. | 18 mm |
| Mounting | Face |
| Shaft Length | 32 mm |
| Overall Length | 5 11/16 in |
| Height | 2 3/8 in |
| Resolution | 0.72 deg Full Step |
| Gear Ratio | 10:1 |
| Width | 2 3/8 in |
| Standards | CE, RoHS |
| Mounting Pattern | 70 x 70mm |
| Requires | Driver 5PFF4 or 5PFF5, Controller 5PFF8 or 5PFF9, Cable 5PFG0 or 5PFG1 |
| Winding Resistance | 2.6 ohm |
| Length Less Shaft | 6 1/4 in |
| Amps per Phase | 1.4 A |
| Motor Shaft Design | Geared |
| Frame | NEMA 34 / 85mm |
| Motor Mounting Type | Face |
| Voltage | 1.63V DC/Phase |
| Mounting Stud Pattern | 70 x 70mm |
| Motor Shaft Rotation | CW/CCW |
| Motor Application | Stepper Motor |
| Max. Ambient Temp. | 50 Degrees C |
| Country of Origin (subject to change) | Korea, Republic of |
| Package Quantity | 1 |
Step Mtr, 5-Ph, 34 Fr, Geared, 1.4A, 200 N-m, AUTONICS, Mfr# A200K-M599-G10
$573,99
Free shipping will be applied on orders over $50
Stepper Motor, Five Phase, Voltage 1.63V DC/Phase, NEMA 34 / 85mm Frame, Max. Holding Torque 19.61nm / 2777.48 oz-in, Rotor Inertia 2,700 g/sq cm, Amps per Phase 1.4 A, Max. Ambient Temp. 50 Degrees C, Motor Shaft Rotation CW/CCW, Motor Mounting Type Face, Shaft Dia. 18 mm, Shaft Length 32 mm, Motor Shaft Design Geared
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.