| Discharge Pump Type | Centrifugal Pump |
| HP - Pumps | 3 hp |
| Phase - Pumps | 3 |
| Voltage - Pumps | 208 to 230/460V AC |
| Max. Pressure - Pumps | 125 psi |
| Housing Material - Pumps | Stainless Steel |
| Inlet Size - Pumps | 2 in NPT |
| Outlet Size - Pumps | 1-1/2 in NPT |
| Motor Enclosure - Pumps | Totally Enclosed Fan-Cooled |
| Best Efficiency Range GPM @ Head | 64.96 to 111.36 gpm @ 80 to 68.7 ft |
| Includes | Manual |
| Impeller Material | Stainless Steel |
| Frame | 56YZ |
| Motor Type | 3 - Phase, Totally Enclosed Fan-Cooled |
| Max. Case Pressure | 125 psi |
| Port Rotation | Top |
| Length | 16 3/4 in |
| Seal Material | 316 Stainless Steel, Carbon Ceramic, Viton |
| Installation Position | Horizontal |
| Motor RPM | 3,500 RPM |
| GPM of Water @ 80 Ft. of Head | 63.2 gpm |
| Wetted Materials | 316 Stainless Steel, AISI 316L Stainless Steel, Carbon, Silicon Carbide, Viton |
| Max. Specific Gravity | 1 |
| Agency Compliance | NSF 61 |
| Height | 8 3/4 in |
| Max. Liquid Temp. | 212 Degrees F |
| GPM of Water @ 70 Ft. of Head | 107 gpm |
| GPM of Water @ 60 Ft. of Head | 131 gpm |
| Amps | 7.8-7.2 / 3.7 |
| Item | Centrifugal Pump |
| Duty | Continuous |
| Inlet Pressure | 1 psi |
| Max. Head | 83 ft |
| Impeller Type | Enclosed |
| Hz | 60 Hz |
| Best Efficiency GPM @ PSI | 92.8 gpm @ 74 ft |
| Flow Rate @ 10 ft of Head (Maximum) | Not Applicable |
| Compatible with Media Type | Water |
| Nameplate Voltage | 208-230/460V AC |
| Maximum Media Temperature | 212 Degrees F |
| Priming | Manual |
| Best Efficiency Flow | 92.8 gpm |
| Wetted Material | Stainless Steel, Buna Elastomers, Carbon, Ceramic Stationary |
| Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 140 ft of Head (Maximum) | Not Applicable |
| Discharge Type | NPT |
| Flow Rate @ 300 ft of Head (Maximum) | Not Applicable |
| Maximum Flow Rate | 131 gpm |
| Nominal Voltage | 208-230/460V AC |
| Flow Rate @ 120 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 220 ft of Head (Maximum) | Not Applicable |
| Intake Type | NPT |
| Flow Rate @ 40 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 15 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 160 ft of Head (Maximum) | Not Applicable |
| Duty Cycle | Continuous |
| Flow Rate @ 20 ft of Head (Maximum) | Not Applicable |
| Compatible Discharge Pipe Size | 1 1/2 in |
| Flow Rate @ 240 ft of Head (Maximum) | Not Applicable |
| Minimum Flow Rate | 63.2 gpm |
| Series | MCS |
| Shaft Material | Stainless Steel |
| Specific Gravity (Maximum) | 1 |
| Flow Rate @ 260 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 80 ft of Head (Maximum) | 64 gpm |
| Best Efficiency Head | 74 ft |
| Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
| Mounting Orientation | Horizontal |
| Motor Frame Designation | 56YZ |
| Flow Rate @ 100 ft of Head (Maximum) | Not Applicable |
| Standards | ANSI, CSA Certified, NSF Certified |
| Maximum Feet of Head | 84 ft |
| Compatible Intake Pipe Size | 2 in |
| Flow Rate @ 30 ft of Head (Maximum) | Not Applicable |
| Overall Width | 6.7 in |
| For Use With Potable Systems | Yes |
| Flow Rate @ 280 ft of Head (Maximum) | Not Applicable |
| Shut Off Pressure (Maximum) | 75 psi |
| Frequency | 60 Hz |
| Flow Rate @ 70 ft of Head (Maximum) | 108 gpm |
| Flow Rate @ 180 ft of Head (Maximum) | Not Applicable |
| Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
| Maximum RPM | 3,500 RPM |
| Overall Height | 8.7 in |
| Seal Type | Mechanical |
| Flow Rate @ 200 ft of Head (Maximum) | Not Applicable |
| Pump Housing Material | Stainless Steel |
| Flow Rate @ 60 ft of Head (Maximum) | 132 gpm |
| Flow Rate @ 90 ft of Head (Maximum) | Not Applicable |
| Overall Length | 13.2 in |
| Motor Enclosure Type | TEFC |
| Features | Easy Accessible Vent, High Efficiency Impeller, Prime and Drain Connections, Superior Material Construction |
| Pumping Application | Air Scrubbers, Booster Service, Chillers, Filtration Systems, General Water Service, Heat Exchangers, Injection Molding Cooling, Jockey Pump, Liquid Transfer, OEM Applications, Reverse Osmosis, Spraying Systems, Washing/Cleaning Systems, Water Circulation |
| Horsepower | 3 hp |
| Intake and Discharge Size | 2 in , 1 1/2 in |
| Impeller Design | Closed |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Straight Centrifugal Pump, GOULDS WATER TECHNOLOGY, Mfr# 150MS1H5D4
$1458,99
-$43.77 / ea
with subscription
Free shipping will be applied on orders over $50
Centrifugal Pump, Phase Three, Pump Housing Material Stainless Steel, Horsepower 3 hp, Nameplate Voltage 208-230/460V AC, Flow Rate @ 60 ft of Head (Maximum) 132 gpm, Flow Rate @ 80 ft of Head (Maximum) 64 gpm, Maximum Feet of Head 84 ft, Compatible Intake Pipe Size 2 in, Intake Type NPT, Compatible Discharge Pipe Size 1 1/2 in, Discharge Type NPT, Motor Enclosure Totally Enclosed Fan Cooled, Maximum Flow Rate 131 gpm, Priming Manual
9999 in stock
Must order in multiples of 1
Subtotal:
$1458.99
You must be logged in to post a review.
-$36.72
with sub
$1223,99
-$40.11
with sub
$1336,99
Reviews
There are no reviews yet.