Body Material
Aluminum (Primary); ABS (Secondary)
Switch Actuation
Vertical Float
Flow Rate @ 10 Ft. of Head
44.0 gpm (Primary); 16.0 gpm (Secondary)
Max. Head
34.0 ft (Primary); 24.0 ft (Secondary)
Cord Length
10 ft (Primary); 8 ft (Secondary)
Max. Liquid Temp.
140 Degrees F
Shaft Seal Material - Pumps
Nitrile Rubber
GPM of Water @ 5 Ft. of Head
48 (Primary), 25.5 (Secondary)
Shaft Seal
Buna N Double Lip (Primary); Buna N Double Lip (Secondary)
GPH of Water @ 10 Ft. of Head
2640 (Primary); 960 (Secondary)
Max. Flow (GPH) - Pumps
3120
Switch Type - Pumps
Vertical
Impeller Material
Polypropylene (Primary); Nylon (Secondary)
12VDC Battery Charger
900 mA
GPH of Water @ 5 Ft. of Head
2880 (Primary), 1530 (Secondary)
Off Point (In.)
3.5 (Primary); 9.5 (Secondary)
GPH of Water @ 15 Ft. of Head
2280 (Primary); 360 (Secondary)
Max. Dia. Solids (In.) - Back-Up
1/4
Max. Diameter Solids
3/8 in
Pump Body Material
Aluminum (Primary), ABS Plastic (Secondary)
Item - Sump Pumps
Sump/Battery Back-Up Combination System
Impeller Material - Pumps
Polypropylene (Primary), Nylon (Secondary)
Switch Type
Vertical Float
GPH of Water @ 0 Ft. of Head
3120 (Primary), 2040 (Secondary)
Duty
Continuos (Primary); Intermitent (Secondary)
Includes
Battery Box and Charger, Check Valves
Base Material
Polypropylene (Primary); Nylon (Secondary)
Housing Material
Aluminum (Primary); ABS Plastic (Secondary)
Motor Type
PSC (Primary); Brush Type DC (Secondary)
On Point (In.)
9.5 (Primary); 11.5 (Secondary)
Max. Head (Ft.) - Back-Up
24
Item
Sump/Battery Back-Up System
Cord Length - Pumps
10 ft. (Primary), 8 ft. (Secondary)
Max. Flow (GPH) - Back-Up
2700
For Use With
Sump Pits Above 15
Switch Electrical Connection
Integral
Primary Pump Flow Rate @ 5 Ft. of Head
48.0 gpm
Flow Rate @ 5 Ft. of Head
48.0 gpm (Primary); 25.5 gpm (Secondary)
Secondary Pump Flow Rate @ 10 Ft. of Head
16.0 gpm
Secondary Pump Rated Voltage
12V DC
Primary Pump Width at Widest Point
10 in
Primary Pump Rated Voltage
115V AC
Secondary Pump Body Material
ABS
Primary Pump Body Material
Aluminum
Primary Pump Impeller Material
Polypropylene
Primary Pump Overall Height
21 1/2 in
Primary Pump Duty Cycle
Continuous
Primary Pump Flow Rate @ 15 Ft. of Head
38.0 gpm
Secondary Pump Maximum Head
24 ft
Width at Widest Point
10 in
Primary Pump Maximum Solids Diameter
3/8 in
Primary Pump Shaft Seal Material
Buna-N
Secondary Pump Impeller Material
Nylon
Secondary Pump Flow Rate @ 15 Ft. of Head
6.0 gpm
Secondary Pump Flow Rate @ 5 Ft. of Head
25.5 gpm
Duty Cycle
Continuous; Intermittent
Primary Pump Flow Rate @ 10 Ft. of Head
44.0 gpm
Secondary Pump Duty Cycle
Intermittent
Flow Rate @ 15 Ft. of Head
38.0 gpm (Primary); 6.0 gpm (Secondary)
Primary Pump Maximum Head
34 ft
Secondary Pump Maximum Solids Diameter
1/4 in
Country of Origin (subject to change)
United States
