HP
1/3 (Primary); 1/3 (Secondary)
Body Material
Cast Aluminum (Primary); ABS (Secondary), Cast Iron
Switch Actuation
Dual Micro Reed
Flow Rate @ 10 Ft. of Head
46.2 gpm (Primary); 30.9 gpm (Secondary)
Max. Head
29.0 ft (Primary)
Item
Sump/Battery Back-Up System
Housing Material
Cast Iron, Cast Aluminum (Primary); ABS (Secondary)
12VDC Battery Charger
1.6 Amps
GPH of Water @ 0 Ft. of Head
4100 (Primary), 2500 (Secondary)
Includes
2 Pumps, Battery Box, Battery Fill Bottle, Monitoring Controller
Max. Head (Ft.) - Back-Up
16
Shaft Seal Material - Pumps
Carbon, Ceramic
Max. Dia. Solids (In.) - Back-Up
3/16
Switch Type
Caged Automatic Dual Float
Max. Flow (GPH) - Pumps
4100
GPH of Water @ 15 Ft. of Head
2580 (Primary) 150 (Secondary)
Duty
Continuous (Primary); Intermittent (Secondary)
Off Point (In.)
10 seconds after the float drops which normally empties the pit (Primary) 30 Seconds (Secondary)
Max. Diameter Solids
1/4 in
GPH of Water @ 10 Ft. of Head
2770 (Primary); 1730 (Secondary)
Switch Type - Pumps
Caged Automatic Dual Float
Pump Body Material
Cast Iron, Cast Aluminum (Primary), ABS (Secondary)
Impeller Material
Cast Iron (Primary); ABS (Secondary)
Max. Liquid Temp.
104 Degrees F
Off Point
10 sec After the Float Drops Which Normally Empties the Pit (Primary); 30 sec (Secondary)
Item - Sump Pumps
Sump/Battery Back-Up System
Impeller Material - Pumps
Cast Iron (Primary), ABS (Secondary)
Base Material
Chrome Plated Steel (Primary); ABS (Secondary)
Shaft Seal
Dual Carbon Ceramic (Primary); Rulon (Secondary)
For Use With
Mfr. No. B-2200
Cord Length - Pumps
10 ft. (Primary), 7 ft. (Secondary)
Motor Type
PSC (Primary) Brush type DC (Secondary)
GPM of Water @ 5 Ft. of Head
50 (Primary), 34.2 (Secondary)
On Point (In.)
9 1/4 (Primary); 11 1/4 (Secondary)
GPH of Water @ 5 Ft. of Head
3000 (Primary), 1420 (Secondary)
Max. Flow (GPH) - Back-Up
2500
Primary Pump Overall Height
22 1/4 in
Primary Pump Width at Widest Point
8 7/8 in
Secondary Pump Maximum Head
16 ft
Secondary Pump Body Material
ABS
Secondary Pump Shaft Seal Material
Rulon
Duty Cycle
Continuous; Intermittent
Primary Pump Impeller Material
Cast Iron
Primary Pump Body Material
Cast Aluminum, Cast Iron
Flow Rate @ 5 Ft. of Head
50.0 gpm (Primary); 34.2 gpm (Secondary)
Switch Electrical Connection
Piggyback
Secondary Pump Maximum Solids Diameter
3/16 in
Primary Pump Flow Rate @ 5 Ft. of Head
50.0 gpm
Primary Pump Rated Voltage
115V AC
Secondary Pump Flow Rate @ 10 Ft. of Head
30.9 gpm
Primary Pump Maximum Solids Diameter
1/4 in
Secondary Pump Rated Voltage
12V DC
Primary Pump Flow Rate @ 10 Ft. of Head
46.2 gpm
Primary Pump Shaft Seal Material
Dual Carbon Ceramic
Primary Pump Maximum Head
29 ft
Flow Rate @ 15 Ft. of Head
43.0 gpm (Primary); 2.5 gpm (Secondary)
Primary Pump Duty Cycle
Continuous
Secondary Pump Flow Rate @ 15 Ft. of Head
2.5 gpm
Secondary Pump Duty Cycle
Intermittent
Secondary Pump Flow Rate @ 5 Ft. of Head
34.2 gpm
Primary Pump Flow Rate @ 20 Ft. of Head
29.0 gpm
Width at Widest Point
8 7/8 in
Secondary Pump Impeller Material
ABS
Primary Pump Flow Rate @ 15 Ft. of Head
43.0 gpm
Flow Rate @ 20 Ft. of Head
29.0 gpm (Primary)
Country of Origin (subject to change)
Multiple
