| Property | Value |
|---|---|
| Drill Bit Grouping | Drill Bit |
| Item | Tap Extractor Set |
| Drill Bit Dimension Type | Metric |
| Drill Bit Size | 2.00mm |
| Drill Bit Point Angle | 118 Degrees |
| Drill Bit Material | Solid Carbide |
| Decimal Equivalent | 0.0787 |
| Drill Bit Finish | Bright (Uncoated) |
| Flute Type | Spiral |
| Coolant Fed | Non-Coolant Through |
| Cutting Direction | Right Hand |
| Depth x Dia. Ratio | 2xD |
| Grade | General Purpose |
| Depth:Dia. Ratio | 2xD |
| Application | For Drilling Hardened Steel 50 to 70 HrC |
| List Number | VHSM |
| Finish - Machining | Bright (Uncoated) |
| Shank Type - Machining | Straight |
| Drill Bit Sizes Included | 2.00 mm, 3.00 mm, 4.00 mm, 5.00 mm, 6.00 mm |
| Measurement System | Metric |
| Material - Machining | Carbide |
| Standards | Not Rated |
| For Spiral Fluted Tap Types | #10, #4, #5, #6, #8, 1/2 in, 1/4 in, 3/8 in, 5/16 in, 7/16 in, M10, M12, M3, M4, M5, M6, M8 |
| For Spiral Pointed Tap Types | #10, #4, #5, #8, 1/4 in, 3/8 in, 5/16 in, M3, M4, M5, M6, M8 |
| For Straight Flute Tap Types | #10, #4, #5, #6, #8, 1/2 in, 1/4 in, 3/8 in, 5/16 in, 7/16 in, M10, M12, M3, M4, M5, M6, M8 |
| Material Grade - Machining | General Purpose |
| Series | EXOCARB XH |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |
Jobber Drill, Carbide, 2mm to 6mm, Osg, Mfr#: 87700
$315.99
Free shipping will be applied on orders over $50
Tap Extractor Set, Drill Bit Size 2.00mm, Drill Bit Point Angle 118 Degrees , Carbide, Bright (Uncoated), Drill Bit Grouping Set, Drill Bit Sizes Included 2.00 mm, 3.00 mm, 4.00 mm, 5.00 mm, 6.00 mm
9999 in stock
Subtotal:
$315.99
You must be logged in to post a review.
Reviews
There are no reviews yet.