| Property | Value |
|---|---|
| Item | Taper Pin |
| System of Measurement | Inch |
| Taper Pin Type | Standard |
| Basic Material | Low Carbon Steel |
| Fastener Finish | Plain |
| Large End Dia. | 0.706 in |
| Small End Dia. | 0.633 in |
| Fastener Length | 3 1/2 in |
| Standards | ANSI/ASME B18.8.2 |
| Meets | ANSI/ASME B18.8.2 |
| Finish | Plain |
| Rockwell Hardness | B85 |
| Type | Standard |
| Material | Steel |
| Package Quantity | 5 |
| Length Tolerance | +/-0.010 in |
| Size | #10 |
| Pin Item | Taper Pin |
| Large End Dia. Tolerance | -0.0007 to +0.0013 in |
| Single Shear Strength (PSI) | 78,000 psi |
| Overall Length | 3-1/2 |
| Single Shear Strength (Lbs.) | 60,000 lb |
| Thread Size | Not Applicable |
| Usable Length | 3 1/2 in |
| Small End Diameter Tolerance | +0.0013/-0.0007 in |
| Pack Size | Small Pack |
| Product Type | Taper Pin |
| Dimensional Standards | ASME B18.8.2 |
| Material Grade/Class | Ungraded |
| Shank Length | 3 1/2 in |
| Shank Length Tolerance | +/-0.010 in |
| Large End Diameter | 0.706 in |
| Small End Diameter | 0.633 in |
| Pin Size | #10 |
| Manufacturer Location | Made in USA* |
| Usable Length Tolerance | +/-0.010 in |
| Pin Type | Standard |
| Large End Diameter Tolerance | +0.0013/-0.0007 in |
| Country of Origin (subject to change) | United States |
Taper Pin, #10, PK5, EnjoyTool Select, Mfr#: WWG-TP166
$21.79
Free shipping will be applied on orders over $50
Taper Pin, Thread Size Not Applicable, Pin Size #10, Large End Diameter 0.706 in, Small End Diameter 0.633 in, Pin Type Standard, Product Type Taper Pin, Material Steel, Material Grade/Class Ungraded, Finish Plain, Usable Length 3 1/2 in, Large End Diameter Tolerance +0.0013/-0.0007 in, Small End Diameter Tolerance +0.0013/-0.0007 in, Shank Length 3 1/2 in, System of Measurement Inch, Usable Length Tolerance +/-0.010 in, Dimensional Standards ASME B18.8.2, Pack Size Small Pack
9999 in stock
Subtotal:
$21.79
You must be logged in to post a review.
Reviews
There are no reviews yet.