| Property | Value |
|---|---|
| Item | Indexable Thread Turning Insert |
| Chip-Breaker | No |
| Cutting Direction | Right Hand |
| ISO Number | 11IRA60 |
| Insert Type | 11IR |
| Inscribed Circle | 1/4 in |
| Thickness | 1/8 |
| Measurement System | Metric |
| Max. Thread Pitch | 1.5 |
| Included Angle | 60 Degrees |
| Threading Location | Internal |
| Max. Threads per Inch | 48 |
| For Toolholder | S10M-SINR-2, SINR1216S-11E, SINR1516S-11 |
| Material Grade - Machining | WC-Co |
| Insert Style | 11IR |
| Primary Material Application | Aluminum, Brass, Bronze, Cast Iron, Copper, Non-Ferrous |
| Number of Cutting Edges | 3 |
| Thread Standard | Metric/ISO; UN |
| Side-to-Cutting Tip | 0.0390 |
| Corner Radius | 0.001 in |
| Insert Length | Clamp or Screw |
| Secondary Material Application | High-Temperature Alloys |
| Min. Thread Pitch | 0.5 mm |
| ANSI Code | 11IRA60 |
| Manufacturer Grade | GW15 |
| Material - Machining | Carbide |
| Secondary Material Application ISO Code | S |
| Min. Thread per Inch | 0.5 mm |
| Finish - Machining | Bright (Uncoated) |
| Insert Holding Type | Clamp or Screw |
| Through Hole Inside Dia. | 0.1180 |
| Thread Profile Type | 60 Degrees Partial |
| Primary Material Application ISO Code | K10, N |
| Country of Origin (subject to change) | Japan |
| Package Quantity | 1 |
Threading Insert, 11 IRA60 GW15 Grade Uncoated Carbide, Kyocera, Mfr#: 11IRA60GW15
$28.39
Free shipping will be applied on orders over $50
Indexable Thread Turning Insert, 11, Internal, Cutting Direction Right Hand, Metric/ISO; UN, Primary Material Application Aluminum, Brass, Bronze, Cast Iron, Copper, Non-Ferrous, Inscribed Circle 60 Degrees , Max. Threads per Inch 48
9999 in stock
Must order in multiples of 5
Subtotal:
$141.95
You must be logged in to post a review.
Reviews
There are no reviews yet.