| HP | 1/3 hp |
| Voltage | 115/230 |
| Wetted Materials | Bronze, Buna-N, Carbon, Ceramic and 304 Stainless Steel |
| Seal Material | 304 Stainless Steel (Spring), Buna-N/Carbon/Ceramic (Face) |
| Max. Pressure | 120 psi |
| Impeller Type | Regenerative Turbine |
| Overload Protection | yes |
| Motor RPM | 3,450 RPM |
| GPM @ 40 PSI | 1.7 |
| Duty | Continuous |
| Item | Turbine Pump |
| Max. Specific Gravity | 1 |
| Hz | 60 |
| GPM @ 50 PSI | 1.5 |
| GPM @ 60 PSI | 1.3 |
| Motor Ambient Temp. Rating | 40 Degrees C |
| Best Efficiency GPM @ Head | 1.0 @ 75 psi |
| Housing Material | Bronze |
| Best Efficiency GPM @ PSI | 1.0 @ 75 |
| GPM @ 100 PSI | 0.7 |
| GPM @ 75 PSI | 1.0 |
| Max. Case Pressure | 200 psi |
| Port Rotation | 90 Degrees Increments |
| Inlet Pressure | 150 psi |
| Manufacturers Warranty Length | 1 yr |
| Max. Liquid Temp. | 230 Degrees F |
| Installation Position | Horizontal |
| Motor Type | Capacitor-Start/Run |
| GPM @ 20 PSI | 2.2 |
| Phase | Single |
| GPM @ 30 PSI | 2.0 |
| GPM @ 80 PSI | 0.9 |
| Inlet (In.) | 3/4 NPT |
| Motor Enclosure | Open Dripproof (ODP) |
| Thermal Protection | yes |
| Agency Compliance | UL Listed |
| Frame | 56J |
| GPM @ 90 PSI | 0.8 |
| Impeller Material | Bronze |
| Pump RPM | 3,450 |
| Outlet | 3/4 in NPT |
| GPM @ 10 PSI | 2.5 |
| Max. Dia. Solids | 0.25 Microns |
| Bearing Type | Ball |
| Width | 6 1/2 in |
| Inlet | 3/4 in NPT |
| Height | 6 5/16 in |
| Amps | 7.5/3.8 |
| Flow Rate @ 30 psi | 2 gpm |
| NPSHr | 150 psi |
| Flow Rate @ 220 psi | Not Applicable |
| Thermal Overload Protection | Yes |
| Flow Rate @ 120 psi | 0 gpm |
| Flow Rate @ 140 psi | Not Applicable |
| Flow Rate @ 80 psi | 0.9 gpm |
| Maximum Flow Rate | 2.5 gpm |
| Flow Rate @ 70 psi | Not Applicable |
| Horsepower | 1/3 hp |
| Impeller Design | Regenerative Turbine |
| Standards | UL Listed |
| Motor Frame Designation | 56J |
| Flow Rate @ 100 psi | 0.7 gpm |
| Maximum RPM | 3,450 RPM |
| Discharge Rotation | 90 Degrees Increments |
| Intake Type | NPT |
| Flow Rate @ 160 psi | Not Applicable |
| Shut Off Pressure (Maximum) | 120 psi |
| Flow Rate @ 240 psi | Not Applicable |
| Manufacturer Warranty Length | 1 yr |
| Nameplate Voltage | 115/230V AC |
| Flow Rate @ 90 psi | 0.8 gpm |
| Case Pressure (Maximum) | 200 psi |
| Discharge Type | NPT |
| Compatible Intake Pipe Size | 3/4 in |
| Maximum Media Temperature | 230 Degrees F |
| Wetted Material | 304 Stainless Steel, Bronze, Buna-N, Carbon, Ceramic |
| Pump Housing Material | Bronze |
| Motor Ambient Temperature (Maximum) | 104 Degrees F |
| Duty Cycle | Continuous |
| Flow Rate @ 50 psi | 1.5 gpm |
| Best Efficiency Head | 75 ft |
| Flow Rate @ 40 psi | 1.7 gpm |
| Features | Boiler Feed, Condensation Return, Liquid Transfer, Pressure Service, Reverse Osmosis Filtration, Seals and an Easily Accessible Drain Plug, Spray Equipment |
| Specific Gravity (Maximum) | 1 |
| Flow Rate @ 20 psi | 2.2 gpm |
| Flow Rate @ 180 psi | Not Applicable |
| Seal Type | Mechanical |
| Mounting Orientation | Horizontal |
| Overall Width | 6.5 in |
| Flow Rate @ 10 psi | 2.5 gpm |
| Solid Diameter (Maximum) | 0.25 micron |
| Flow Rate @ 15 psi | Not Applicable |
| Compatible Discharge Pipe Size | 3/4 in |
| Overall Height | 6.31 in |
| Compatible with Media Type | Non-Flammable Liquids, Water |
| Flow Rate @ 200 psi | Not Applicable |
| Motor Enclosure Type | ODP |
| Minimum Flow Rate | 0.7 gpm |
| Frequency | 60 Hz |
| Intake and Discharge Size | 3/4 in , 3/4 in |
| Flow Rate @ 260 psi | Not Applicable |
| Flow Rate @ 60 psi | 1.3 gpm |
| Country of Origin (subject to change) | India |
| Package Quantity | 1 |
Turbine Pump, 1/3 HP, 115 to 230V, 3450 rp, DAYTON, Mfr# 53EA94
$415,99
Free shipping will be applied on orders over $50
Turbine Pump, Phase Single, Pump Housing Material Bronze, Motor Enclosure Open Dripproof, Horsepower 1/3 hp, Nameplate Voltage 115/230V AC, Shut Off Pressure (Maximum) 120 psi, Maximum Flow Rate 2.5 gpm, Flow Rate @ 10 psi 2.5 gpm, Flow Rate @ 20 psi 2.2 gpm, Flow Rate @ 30 psi 2 gpm, Compatible Intake Pipe Size 3/4 in, Compatible Discharge Pipe Size 3/4 in, Discharge Type NPT, Motor Type Capacitor-Start/Run, Best Efficiency Head 75 ft, Case Pressure (Maximum) 200 psi
0 in stock
Must order in multiples of 1
Subtotal:
$415.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.