| Item | Uninterruptible Power Supply-1000Va |
| Input Voltage | 120VAC |
| Phase - Electrical | 1 |
| Output Voltage | 120VAC |
| Amps | 9.2 A |
| Display | LCD |
| Power Rating | 1kVA |
| Includes | PowerAlert Software, Serial and EPO Cables and 4-Post Rackmount Installation Kit, USB |
| Mounting | Rack |
| Case Material | Steel |
| Height | 3.4 in |
| Number of Outlets | 6 |
| Hz | 60 |
| Features | Cold-Start Operation Supported, EMI/RFI AC Noise Suppression, Individually Controllable Load Banks |
| Width | 17.3 in |
| Depth | 12.5 in |
| Temp. Range | 0 to 40°C |
| Standards | UL1778 |
| Watts | 800W |
| NEMA Receptacle Configuration | 5-15R |
| Green Environmental Attribute | Product Contributes To Reducing Energy Consumption |
| Footnotes | Slot for SNMPWEBCARD |
| Ports | EPO, RS232, Slot for SNMPWEBCARD, USB |
| Output Voltage - UPS Systems | 120V AC |
| Medical Grade | No |
| Input Current | 9.2 A |
| Outlet Type | UPS/Surge |
| Mounting - UPS Systems | Rack |
| Transfer Time | 2 to 4 msec |
| VA Rating - UPS Systems | 1.0 kVA |
| Automatic Volts Regulation | Yes |
| Watts - UPS Systems | 800.0 W |
| Cord Length | 10 ft |
| Display Type | LCD |
| UPS Type | Line Interactive |
| Fax/Modem Line Protection | No |
| Phase | 1 |
| Outlet Type - UPS Systems | UPS/Surge |
| Special Features | Hot Swappable Batteries |
| Input Voltage - UPS Systems | 120V AC |
| Backup Time (Half/Full Load) | 15 min/5.3 min |
| NEMA Plug Configuration | 5-15p |
| Line Regulation | -21%, +8% |
| Max. dBA | 45 dBA |
| Type | Line-Interactive |
| Typical Battery Recharge Time | 4 Hour |
| Total Number of Expansion Slots | 1 |
| Receptacle Detail | 6 x NEMA 5-15R |
| Product Name | SMART1000RM2U UPS System |
| Load Capacity | 1000 VA/800 W |
| Battery Chemistry | Lead Acid |
| Certifications & Standards | UL1778 (USA), cUL (Canada), FCC Class B (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications |
| Alarm | Overload, Low Battery, On Battery |
| Emergency Power OFF | Yes |
| Package Contents | SMART1000RM2U UPS System, PowerAlert Software CD, Serial & EPO Cabling, 4 x Post Rackmount Installation Kit, Instruction Manual |
| Backup/Run Time (Half Load) | 15 Minute |
| Product Line | SmartPro |
| Backup/Run Time (Full Load) | 5.30 Minute |
| Maximum Operating Temperature | 104°F (40°C) |
| USB | Yes |
| Hot Swappable | Yes |
| Waveform Type | Sine Wave |
| Plug/Connector Type | NEMA 5-15P |
| Rack Height | 2U |
| Product Type | Line-interactive UPS |
| Network Management | SNMP Manageable |
| Software Included | PowerAlert Software |
| Battery Access | Front panel battery access door |
| Product Certifications | CSA (Canada), NOM (Mexico), UL 1778 |
| Alarm Cancel Operation | Power-fail alarm can be temporarily silenced using alarm-cancel switch, silent mode alarm configuration option available |
| Network Management Cards | TLNETCARD , WEBCARDLXE |
| UPS Input Connection Type | 5-15P |
| Runtime Half Load (min.) | 15 min. (400W) |
| Primary UPS Width (mm) | 441 |
| Installation Form Factors Supported with Included Accessories | 4 post 19 inch rackmount |
| Network Monitoring Port Description | Supports detailed monitoring of UPS and site power conditions |
| Output Voltage Regulation (Battery Mode) | +/- 5% |
| Frequency Compatibility | 60 Hz |
| Package Includes | SMART1000RM2U SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS,USB cable,DB9 cable,EPO cable,Mounting hardware,Owner's manual |
| High Voltage Transfer to Battery Power (Setpoint) | 147 |
| Output AC Waveform (AC Mode) | Sine wave |
| Input Phase | Single-Phase |
| Output Voltage Regulation (Line Mode) | -21%, +8% |
| UPS AC Suppression Response Time | Instantaneous |
| AC Mode Efficiency Rating (100% Load) | 0.95 |
| Minimum Required Rack Depth (inches) | 16 |
| UPS Input Cord Length (ft.) | 10 |
| Cold Start (Startup in Battery Mode During a Power Failure) | Cold-start operation supported |
| Cooling Method | Fan |
| Undervoltage Correction | Input voltages between 83 and 107 are boosted by 14% |
| Primary Form Factor | Rackmount |
| Nominal Output Voltage(s) Supported | 110V, 115V, 120V |
| Input Circuit Breakers | 15A |
| AC Mode BTU / Hr. (Full Load) | 134 |
| Audible Noise | 45 dBA maximum, front side 1m |
| Installation Form Factors Supported with Optional Accessories | 2 post rackmount ( 2POSTRMKITWM ), 2-4 post front rail rackmount ( UPSHDEARKIT ), 4 post rackmount short-depth ( 4POSTRAILKITWM ), Tower ( 2-9USTAND ), Wallmount ( 2POSTRMKITWM ) |
| Battery Type | Valve Regulated Lead Acid (VRLA) |
| Nominal Input Voltage(s) Supported | 120V AC |
| Output AC Waveform (Battery Mode) | Pure Sine wave |
| DC System Voltage (VDC) | 24 |
| Communications Cable | USB and DB9 cabling included |
| Primary UPS Depth (mm) | 318 |
| High Availability UPS Features | Auto Probe Monitoring and Reboot (requires WEBCARDLX), Automatic Voltage Regulation (AVR), Hot swappable batteries, Remote management, Surge/noise protection |
| Recommended Electrical Service | 15A 120V |
| EMI / RFI AC Noise Suppression | Yes |
| UPS Applications | Large Network, High-End Desktop/Small Network, Retail/Point of Sale, Hospitality |
| UPS Power Module Dimensions (hwd, in.) | 3.45 x 17.35 x 12.5 |
| Primary UPS Height (mm) | 88 |
| WatchDog Compatibility | Supports Watchdog application, OS and hard-reboot restart options for remote applications |
| Voltage Regulation Description | Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 147 |
| Internal UPS Replacement Battery Cartridge | Current version uses RBC24V-LCD , Prior versions used RBC92-2U , Check the label inside the battery door to verify the appropriate replacement battery part number |
| Individually Controllable Load Banks | Yes |
| Product Compliance | FCC Part 15 Class B (USA) |
| Relative Humidity | 0 to 95%, non-condensing |
| Runtime Full Load (min.) | 5.3 min. (800W) |
| Communications Interface | DB9 Serial, EPO (emergency power off), Slot for SNMP/Web interface, USB (HID enabled) |
| Power Factor | 0.8 |
| Rated input current (Maximum Load) | 9.2A |
| Front Panel LCD Display | Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options) |
| Load Management Receptacles | Two switchable two-outlet 5-15R load banks |
| Included Mounting Accessory Description | Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm) |
| Output Capacity (VA) | 1000 |
| Battery Replacement Description | Hot-swappable, user replaceable batteries |
| Battery Recharge Rate (Included Batteries) | Less than 4 hours from 10% to 90% (typical, full load discharge) |
| Low Voltage Transfer to Battery Power (Setpoint) | 83 |
| UPS Housing Material | Steel |
| Output Capacity (Watts) | 800 |
| Nominal Voltage Details | 120v nominal output in battery mode |
| UPS AC Suppression Joule Rating | 570 |
| Audible Alarm | Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions |
| Output Receptacles | (6) 5-15R |
| Grounding Details | Back panel grounding lug |
| Battery Mode Heat Dissipation (BTU/Hr) @ Full Load | 600 |
| Operating Temperature Range | 32° to 104°F (0° to 40°C) |
| Switches | 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions |
| Overvoltage Correction | Input voltages between 128 and 147 are reduced by 12% |
| Storage Temperature Range | 5° to 122°F (-15° to 50°C) |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Uninterruptible Power Supply-1000Va, TRIPP LITE, Mfr# SMART1000RM2U
$765,99
Free shipping will be applied on orders over $50
Uninterruptible Power Supply-1000Va
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.