| Item | Utility Pump |
| HP | 1/10 hp |
| Voltage | 12 V DC |
| Amps AC | 6.5 to 10 |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Duty | Intermittent |
| Inlet/Outlet (In.) | 3/8 ID, 3/4 OD Garden Hose |
| GPM of Water @ 5 Ft. of Head | 3.72 gpm |
| Max. Head (Ft.) | 36.7 ft |
| Max. Pressure (PSI) | 19.9 psi |
| Includes | Gasket, Two Impellers |
| GPM of Water @ 10 Ft. of Head | 3.32 gpm |
| Max. Suction Lift (Ft.) | 7 ft |
| Impeller | Buna-N |
| GPH of Water @ 20 Ft. of Head | 202 gph |
| GPH of Water @ 40 Total Ft. of Head | 96 gph |
| Height (In.) | 4 3/16 in |
| Application | Use to Empty Waterbeds, Drain Water Heaters or Aquariums, Pump Out Basement, Transfer Water to RV, Pump Boat Bilges, Pump Out Stock Tanks or Water Transfer. For Use With Nonflammable Liquids |
| Motor Type | DC |
| GPH of Water @ 10 Ft. of Head | 240 gph |
| Self-Priming | Yes |
| GPM of Water @ 20 Ft. of Head | 2.31 gpm |
| Bearings | Ball |
| Shaft Dia. (In.) | 63/200 in |
| RPM | 4,000 RPM |
| Cord | 7 ft |
| Pumps Up To (Ft.) | 46 ft |
| Shaft Material | Stainless Steel |
| Max. Liquid Temp. (F) | 140 Degrees F |
| Body Material | Stainless steel |
| Type | Compact Flexible Impeller |
| GPH of Water @ 5 Total Ft. of Head | 258 gph |
| GPH of Water @ 30 Total Ft. of Head | 150 gph |
| Width (In.) | 4 in |
| GPM of Water @ 30 Ft. of Head | 2.5 gpm |
| Seals | Buna N Radial Lip |
| GPH of Water @ 1 Ft. of Head | 300 gph |
| Length (In.) | 6 1/8 in |
| Housing Material | Stainless Steel |
| Cord Length | 7 ft |
| Impeller Material | Buna-N |
| Overall Height | 4.2 in |
| Overall Length | 6.1 in |
| Overall Width | 4 in |
| Flow Rate @ 30 ft of Head - Maximum | 1.2 gpm |
| Discharge Connection Type | Hose |
| Impeller Diameter | 1 3/8 in |
| Flow Rate @ 1 ft of Head - Maximum | 3.9 gpm |
| Horsepower - Maximum | 1/10 hp |
| Seal Type | Lip |
| Media Intake Connection Size | 3/8 in |
| Flow Rate @ 10 ft of Head - Maximum | 3.3 gpm |
| Feet of Head - Maximum | 36.7 ft of head |
| Motor Mounting Type | Horizontal |
| Flow Rate @ 50 ft of Head - Maximum | Not Applicable |
| Phase | Single |
| Seal Material | Buna-N |
| Flow Rate @ 60 ft of Head - Maximum | Not Applicable |
| Bearing Material | Stainless Steel |
| Flow Rate @ 20 ft of Head - Maximum | 2.3 gpm |
| Priming | Self-Priming |
| Nameplate Voltage | 12V DC |
| Media Intake Connection Type | MGHT |
| Wetted Material | Buna-N, Stainless Steel |
| For Media Type | Water |
| Frequency | Not Applicable |
| Bearing Type | Ball |
| Suction Lift - Maximum | 7 ft |
| Media Temperature - Minimum | 40 Degrees F |
| Flow Rate @ 40 ft of Head - Maximum | Not Applicable |
| Current | 10 A |
| Media Temperature - Maximum | 140 Degrees F |
| Discharge Connection Size | 3/4 in |
| Compatible Motor Frame | Not Applicable |
| Shaft Outer Diameter | 3/8 in |
| Viscosity - Maximum | Not Applicable |
| Operating Pressure - Maximum | 15.9 psi |
| Motor Speed - Maximum | 4,000 RPM |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Utility Pump 12VDC, DAYTON, Mfr# 5UXN0
$146,99
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Utility Pump, Housing Material Stainless Steel, Horsepower - Maximum 1/10 hp, Nameplate Voltage 12V DC, Flow Rate @ 10 ft of Head - Maximum 3.3 gpm, Viscosity - Maximum Not Applicable, Feet of Head - Maximum 36.7 ft of head, Discharge Connection Size 3/4 in, Media Intake Connection Size 3/8 in, Media Intake Connection Type MGHT, Impeller Material Buna-N, Discharge Connection Type Hose, Cord Length 7 ft, Priming Self-Priming, Operating Pressure - Maximum 15.9 psi, Suction Lift - Maximum 7 ft
9999 in stock
Must order in multiples of 1
Subtotal:
$146.99
You must be logged in to post a review.
Reviews
There are no reviews yet.