Item - Relay | Voltage Sensing Relay |
Item | Voltage Relay |
Coil Volts | 250VAC/DC |
Standards | EN/IEC 60255-6 |
Width | 35 mm |
Product Or Component Type | voltage control relay |
Relay Name | RM35UA |
Tightening Torque | 0.6-1 N.m IEC 60947-1 |
Sensitivity Scale | 15...150 V E1-M terminals || 30...300 V E2-M terminals || 60...600 V E3-M terminals |
Overvoltage Category | III IEC 60664-1 |
Measurement Range | 15...600 V voltage |
Control Circuit Frequency | 40...70 Hz +/- 10 % |
Immunity To Microbreaks | 10 ms |
Vibration Resistance | 0.35 mm 5-57.6 Hz)IEC 60068-2-6 || 1 gn 57.6-150 Hz)IEC 60255-21-1 |
[Us] Rated Supply Voltage | 24...240 V AC/DC 50/60 Hz +/- 10 % |
Operating Position | any position without derating |
Local Signalling | for power ON LED (green) || for relay ON LED (yellow) |
Supply Voltage Limits | 20.4-264 V AC/DC |
Output Contacts | 2 C/O |
Mechanical Durability | 30000000 cycles |
Shock Resistance | 5 gn IEC 60068-2-27 |
Maximum Power Consumption In W | 0.6 W DC |
Utilisation Category | AC-12 IEC 60947-5-1 || AC-13 IEC 60947-5-1 || AC-14 IEC 60947-5-1 || AC-15 IEC 60947-5-1 || DC-12 IEC 60947-5-1 || DC-13 IEC 60947-5-1 || DC-14 IEC 60947-5-1 |
Insulation Resistance | > 500 MOhm 500 V DC between supply and relay output IEC 60255-5 || > 500 MOhm 500 V DC between measurement and relay output IEC 60664-1 || > 1 MOhm 500 V DC between supply and measurement IEC 60255-5 || > 500 MOhm 500 V DC between supply and relay output IEC 60664-1 || > 500 MOhm 500 V DC between measurement and relay output IEC 60255-5 || > 1 MOhm 500 V DC between supply and measurement IEC 60664-1 |
Quality Labels | CE |
Maximum Measuring Cycle | 30 ms measurement cycle as true rms value |
Electromagnetic Compatibility | emission standard for industrial environments EN/IEC 61000-6-4 || emission standard for residential, commercial and light-industrial environments EN/IEC 61000-6-3 || immunity for industrial environments NF EN/IEC 61000-6-2 |
Mounting Support | 35 mm symmetrical DIN rail conforming to EN/IEC 60715 |
Contacts Type And Composition | 2 C/O |
Relay Type | multifunction voltage control relay |
Compatibility Code | RM3 |
Product Certifications | GOST || UL || GL || C-tick || CSA |
Reset Time | 1500 ms time delay |
[Ui] Rated Insulation Voltage | 250 V IEC 60664-1 || 600 V IEC 60664-1 |
Hysteresis | 5-50 % threshold setting |
Time Delay Type | adjustable 0.3...30 s, 0 + 10 % on crossing the threshold |
Switching Capacity In Va | 1250 VA |
Polarity | non reversible polarity on DC supply |
Housing Material | self-extinguishing plastic |
Ip Degree Of Protection | IP20 IEC 60529 terminals) || IP30 IEC 60529 casing) |
Relay Monitored Parameters | overvoltage or undervoltage detection |
Ambient Air Temperature For Storage | -40-70°C |
Power Consumption In Va | 0-3.5 VA AC |
Run-Up Delay At Power-Up | 600 ms |
Connections - Terminals | screw terminals, 1 x 0.5...1 x 4 mm? AWG 20...AWG 11) solid without cable end || screw terminals, 2 x 0.5...2 x 2.5 mm? AWG 20...AWG 14) solid without cable end || screw terminals, 1 x 0.2...2 x 2.5 mm? AWG 24...AWG 12) flexible with cable end || screw terminals, 2 x 0.2...2 x 1.5 mm? AWG 24...AWG 16) flexible with cable end |
Repeat Accuracy | +/- 0.5 % input and measurement circuit || +/- 2 % time delay |
Control Circuit Voltage Limits | 15 % + 10 % Un |
Non-Dissipating Shock Wave | 4 kV IEC 60255-5 || 4 kV IEC 60664-1 || 4 kV IEC 61000-4-5 |
Measurement Error | +/- 0.05 %/°C with temperature variation || < 1 % over the whole range with voltage variation |
Minimum Switching Current | 10 mA 5 V DC |
Resistance Across Terminals | 150 mOhm E1-M terminals || 300 mOhm E2-M terminals || 600 mOhm E3-M terminals |
Electrical Durability | 100000 cycles |
Nominal Output Current | 5A |
Ambient Air Temperature For Operation | -20-50°C |
Pollution Degree | 3 IEC 60664-1 |
Relative Humidity | 95-95 % 55-55°C IEC 60068-2-30 |
Operating Rate | <= 360 operations/hour full load |
Maximum Switching Voltage | 250 V AC/DC |
Measurement Accuracy | +/- 10 % of the full scale value |
Threshold Setting | 10...100 % |
Dielectric Test Voltage | 2 kV AC 50 Hz, 1 min IEC 60255-5 || 2 kV AC 50 Hz, 1 min IEC 60664-1 |
Maximum Switching Current | 5 A AC/DC |
Country of Origin (subject to change) | Multiple |
Package Quantity | 1 |
Voltage Relay 250V 5Amp Rm35, SCHNEIDER ELECTRIC, Mfr# RM35UA13MW
$160,99
Free shipping will be applied on orders over $50
Voltage Relay
9999 in stock
Must order in multiples of 1
Subtotal:
$160.99
You must be logged in to post a review.
Reviews
There are no reviews yet.