Zoeller 57-0001 9 ft. Cord 0.33HP All Cast Iron Submersible Sump Pump with Vertical Float Switch, Zoeller, Mfr#: 57-0001

Features Float-operated, submersible, 2-pole mechanical switch and variable level Corrosion-resistant, powder-coated epoxy finish No sheet metal parts to rust or corrode Stainless steel screws, switch arm, guard, and handle No screens to clog Watertight, neoprene square ring between motor and pump housing Solid, buoyant, polypropylene float Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor Upper and lower sleeve Bearings running in bath of oil Entire unit pressure-tested after assembly Carbon and Ceramic shaft seal Maximum temperature for effluent or dewatering: 130 deg F (54 deg C) Passes 1/2" (13 mm) spherical solids 1-1/2" NPT discharge On point: 7-1/4" (18 cm) Off Point: 3" (8 cm) Major width: 10-3/32" (26.2 cm) Major Height: 10-1/16" (25.6 cm) Watertight and dust-tight Specifications Motor: 3/10 HP Voltage: 115 or 230 V Phase: 1 Ph Hertz: 60 Hz RPM: 1550 RPM Type: Shaded pole Insulation: Class B Amps: 4.8 – 9.7 Amps Operation: Automatic or nonautomatic Auto On / Off Points: 7-1/4" / 3" (18.4 cm / 7.6 cm) Discharge Size: 1-1/2" NPT Solids Handling: 1/2" (12 mm) spherical solids Cord Length: 9′ (3 m) auto, 15′ (5 m) nonauto Cord Type: UL listed, 3-wire cord and plug Max Head: 19.25′ (5.9 m) Max Flow Rate: 43 GPM (163 LPM) Max Operating Temperature: 130 °F (54 °C) Cooling: Oil filled Motor Protection: Auto reset thermal overload Cap: Cast Iron or bronze Motor Housing: Cast Iron or bronze Pump Housing: Cast Iron or bronze Base: Cast Iron,