| Item | Air Gearmotor |
| Motor Design | Not Applicable |
| Running Torque @ Max. Pressure | 62 in-lb |
| Max. Air Flow | 21 cfm |
| HP | 0.34 hp |
| No Load RPM | 350 RPM |
| Shaft Dia. | 1/2 in |
| Mounting | Face |
| Port Size | 1/8 in NPT |
| Rotation | CW/CCW |
| Overall Length | 6 7/8 in |
| Overall Height | 2 15/16 in |
| Shaft Length | 1 3/8 in |
| Gear Ratio | 15:1 |
| Finish | Gray |
| RPM @ Max. Torque | 30 RPM |
| Housing Material | Aluminum |
| Overall Width | 2 15/16 in |
| Operating Temp. Range | 0 Degrees to 250 Degrees F |
| Max. Air Pressure | 100 psi |
| Mount Type | Face |
| Length Less Shaft | 5 1/2 in |
| Includes | Muffler |
| Standards | Not Applicable |
| Outside Diameter | 3 in |
| Weight | 2.87 lb |
| AGMA Gear Class | Not Applicable |
| Minimum Flow Rate | 3.17 cfm |
| Maximum Ambient Temperature | 250 Degrees F |
| Gear Material | Steel |
| External Hardware Material | Not Applicable |
| Mount Hole Center-to-Center Length | Not Applicable |
| Brake Type | Not Applicable |
| Mount Hole Center-to-Center Width | Not Applicable |
| Minimum Ambient Temperature | 0 Degrees F |
| Motor Frame Material | Cast Iron |
| IP Rating | Not Applicable |
| Output Power @ 50% Maximum Speed | Not Applicable |
| Air Inlet Type | NPT |
| Shaft Diameter | 1/2 in |
| Seal Material | Nitrile Rubber |
| Number of Output Shafts | 1 |
| Bearing Protection | Not Applicable |
| Keyway Length | Not Applicable |
| Series | Not Applicable |
| Gear Material Grade | 42CrMo |
| Output Power @ 25% Maximum Speed | Not Applicable |
| Manufacturers Warranty Length | 1 yr |
| Starting Torque | 4.06 ft-lb |
| Maximum Flow Rate | 21 cfm |
| Keyway Type | Not Applicable |
| Housing Material Finish | Painted |
| Gear Type | Not Applicable |
| Shaft Material | Steel |
| Air Inlet Center to Center Distance | 1 3/4 in |
| Maximum Operating Pressure | 100 psi |
| Nameplate Speed | 20 RPM |
| Housing Material Grade | 42CrMo |
| Shaft Material Grade | 42CrMo |
| Air Consumption | 21 cfm |
| Keyway Width | Not Applicable |
| Speed @ Maximum Torque | 30 RPM |
| Keyway Depth | Not Applicable |
| No Load Speed | 350 RPM |
| Inlet Gender | Female |
| Shaft Orientation | Parallel |
| Mounting Orientation | Any Angle |
| Minimum Operating Pressure | 20 psi |
| Output Location | Not Applicable |
| Output Power @ Maximum Speed | 0.34 hp |
| System of Measurement | Inch |
| Maximum Torque | 62 in-lb |
| Inlet Size | 1/8 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Air Gearmotor, 0.34 HP, 21 cfm, 350 rpm, SPEEDAIRE, Mfr# 22UX82
$307,99
-$9.24 / ea
with subscription
Free shipping will be applied on orders over $50
Air Gearmotor, Output Power @ Maximum Speed 0.34 hp, Maximum Torque 62 in-lb, No Load Speed 350 RPM, Maximum Flow Rate 21 cfm, Shaft Diameter 1/2 in, Shaft Length 1 3/8 in, Mount Type Face, Inlet Size 1/8 in, Air Inlet Type NPT, Rotation CW/CCW, Housing Material Aluminum, Gear Ratio 15:1, Air Consumption 21 cfm, Housing Material Finish Painted, AGMA Gear Class Not Applicable, Air Inlet Center to Center Distance 1 3/4 in, Inlet Gender Female, Output Power @ 25 Percent Maximum Speed Not Applicable
9999 in stock
Must order in multiples of 1
Subtotal:
$307.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.