| Item | Air Gearmotor |
| Motor Design | Not Applicable |
| Running Torque @ Max. Pressure | 256 in-lb |
| HP | 0.9 hp |
| Max. Air Flow | 27 cfm |
| No Load RPM | 150 RPM |
| Shaft Dia. | 5/8 in |
| Mounting | Base |
| Port Size | 1/4 in NPT |
| Rotation | CCW |
| Overall Length | 9 7/8 in |
| Overall Height | 6 5/16 in |
| Operating Temp. Range | 0 Degrees to 250 Degrees F |
| Includes | Muffler |
| RPM @ Max. Torque | 60 RPM |
| Shaft Length | 2 1/16 in |
| Overall Width | 7 1/4 in |
| Housing Material | Cast Iron |
| Finish | Gray |
| Keyway Length | 1 in |
| Gear Ratio | 20:1 |
| Max. Air Pressure | 100 psi |
| Standards | Not Applicable |
| Mount Type | Base |
| Length Less Shaft | Not Applicable |
| Weight | 24.25 lb |
| Outside Diameter | Not Applicable |
| Inlet Gender | Female |
| Maximum Torque | 256 in-lb |
| Shaft Orientation | Right Angle |
| Maximum Flow Rate | 27 cfm |
| Manufacturers Warranty Length | 1 yr |
| Starting Torque | 21.4 ft-lb |
| Series | Not Applicable |
| Bearing Protection | Not Applicable |
| Minimum Flow Rate | 2.74 cfm |
| Gear Type | Not Applicable |
| Mount Hole Center-to-Center Length | Not Applicable |
| Keyway Type | Flat Key |
| Shaft Material Grade | 42CrMo |
| Output Power @ Maximum Speed | 0.9 hp |
| Minimum Operating Pressure | 20 psi |
| Number of Output Shafts | 1 |
| Keyway Depth | 1/8 in |
| AGMA Gear Class | Not Applicable |
| Air Consumption | 27 cfm |
| Housing Material Grade | 42CrMo |
| Keyway Width | 3/16 in |
| Output Location | Not Applicable |
| Seal Material | Nitrile Rubber |
| Shaft Material | Steel |
| Nameplate Speed | 17 RPM |
| Mounting Orientation | Any Angle |
| No Load Speed | 150 RPM |
| Air Inlet Type | NPT |
| Mount Hole Center-to-Center Width | Not Applicable |
| Shaft Diameter | 5/8 in |
| Output Power @ 25% Maximum Speed | Not Applicable |
| Motor Frame Material | Cast Iron |
| System of Measurement | Inch |
| Gear Material Grade | C95400 |
| Speed @ Maximum Torque | 60 RPM |
| Gear Material | Copper |
| External Hardware Material | Not Applicable |
| Maximum Ambient Temperature | 250 Degrees F |
| Inlet Size | 1/4 in |
| Minimum Ambient Temperature | 0 Degrees F |
| Housing Material Finish | Painted |
| Brake Type | Not Applicable |
| Maximum Operating Pressure | 100 psi |
| Output Power @ 50% Maximum Speed | Not Applicable |
| IP Rating | Not Applicable |
| Air Inlet Center to Center Distance | 2 1/2 in |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Air Gearmotor, 0.9 HP, 27 cfm, 150 rpm, SPEEDAIRE, Mfr# 22UX57
$711,99
Free shipping will be applied on orders over $50
Air Gearmotor, Output Power @ Maximum Speed 0.9 hp, Maximum Torque 256 in-lb, No Load Speed 150 RPM, Maximum Flow Rate 27 cfm, Shaft Diameter 5/8 in, Shaft Length 2 1/16 in, Mount Type Base, Inlet Size 1/4 in, Air Inlet Type NPT, Rotation CCW, Housing Material Cast Iron, Gear Ratio 20:1, Air Consumption 27 cfm, Housing Material Finish Painted, AGMA Gear Class Not Applicable, Air Inlet Center to Center Distance 2 1/2 in, Inlet Gender Female, Output Power @ 25 Percent Maximum Speed Not Applicable
Out of stock
Analogues
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.