| Item | Linear Ball Bearing |
| Type | Open |
| Bore Dia. | 1 in |
| Outside Dia. | 1 9/16 in |
| Material | Stainless Steel |
| Dynamic Load Capacity (Lb.) | 240 |
| Dimension T | 1 |
| For Use With | Thomson Shafting |
| Slot Angle (Degrees) | 60 Degrees |
| Dimension C2 | 0.068 |
| Slot Width (In.) | 0.56 in |
| Dimension E | 0.56 in |
| Required Housing Bore Dia. (In.) | 1.563 in |
| Dimension C1 | 1.759 in |
| Self-Alignment | Not Self-Aligning |
| Dimension C | 2.25 in |
| Temp. Range (F) | 0 - 300 |
| Accelerated Speed | 450 fps |
| Length (In.) | 2 1/4 in |
| Steady State Speed | 10 fps |
| Between Grooves (mm) | 1.759 in |
| Inside Dia. Tolerance | +/-.001 |
| Dynamic Load Capacity (N) | 240 lbf |
| System of Measurement | Inch |
| Operating Temperature Range | 0 Degrees F to 600 Degrees F |
| Brand & Series | THOMSON Precision |
| Minimum Operating Temperature | 0 Degrees F |
| Inside Dia. | 1 in |
| Maximum Operating Temperature | 600 Degrees F |
| Included Wiper Seals | No Wipers |
| Series | Precision |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |
Ball Bushing, Bore Dia 1.000 In, THOMSON, Mfr# OPN162536SS
$271,99
Free shipping will be applied on orders over $50
Linear Ball Bearing, Type Open, Inside Dia. 1 in, Outside Dia. 1 9/16 in, Material Stainless Steel, Accelerated Speed 450 fps, Between Grooves (mm) 1.759 in, Dimension B -, Dimension C 2.25 in, Dimension C1 1.759 in, Dimension C2 0.068, Dimension d -, Dimension E 0.56 in, Dimension F -, Dimension G -, Dimension T 1, Dynamic Load Capacity (N) 240 lbf, For Use With Thomson Shafting, Inside Dia. Tolerance +/-.001, Maximum Operating Temperature 600 Degrees F
9999 in stock
Must order in multiples of 1
Subtotal:
$271.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.