| Item | Linear Ball Bearing |
| Type | Open |
| Bore Dia. | 1.5 in |
| Outside Dia. | 2 3/8 in |
| Material | Delrin |
| Dynamic Load Capacity (Lb.) | 3,880 |
| Accelerated Speed | 450 fps |
| Inside Dia. Tolerance | +/-0.001 |
| Length (In.) | 3 in |
| Retention Hole Dia. (mm) | 0.2 in |
| Required Housing Bore Dia. (In.) | 2.375 in |
| Self-Alignment | Self-Aligning |
| Retention Hole Location | 0.19 in |
| Slot Angle (Degrees) | 30 Degrees |
| Dimension F | 0.2 in |
| Dimension C1 | 2.442 in |
| Dimension T | 1.5 |
| Dimension G | 0.190 in |
| Dimension C | 3 in |
| Between Grooves (mm) | 2.442 in |
| Temp. Range (F) | 0 a 185 |
| For Use With | Thomson Shafting |
| Steady State Speed | 10 fps |
| Slot Width (In.) | 0.74 in |
| Dynamic Load Capacity (N) | 3,880 lbf |
| Brand & Series | THOMSON Super Smart |
| Operating Temperature Range | 185 Degrees F |
| Included Wiper Seals | Two Integral Wipers |
| System of Measurement | Inch |
| Maximum Operating Temperature | 185 Degrees F |
| Series | Super Smart |
| Inside Dia. | 1 1/2 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |
Ball Bushing, Bore Dia 1.500 In, THOMSON, Mfr# SSU24OPNWW
$197,99
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Linear Ball Bearing, Type Open, Inside Dia. 1 1/2 in, Outside Dia. 2 3/8 in, Material Delrin, Accelerated Speed 450 fps, Between Grooves (mm) 2.442 in, Dimension C 3 in, Dimension C1 2.442 in, Dimension F 0.2 in, Dimension G 0.190 in, Dimension T 1.5, Dynamic Load Capacity (N) 3,880 lbf, For Use With Thomson Shafting, Inside Dia. Tolerance +/-0.001, Maximum Operating Temperature 185 Degrees F, Length (In.) 3 in, Retention Hole Dia. (mm) 0.2 in, Retention Hole Location 0.19 in, Seal -
9999 in stock
Must order in multiples of 1
Subtotal:
$197.99
You must be logged in to post a review.
Reviews
There are no reviews yet.