| Item | Linear Ball Bearing |
| Type | Open |
| Bore Dia. | 2.5 in |
| Outside Dia. | 3 3/4 in |
| Material | Steel |
| Dynamic Load Capacity (Lb.) | 1,380 |
| Temp. Range (F) | 0 - 300 |
| Dimension E | 1.25 in |
| For Use With | Thomson Shafting |
| Self-Alignment | Not Self-Aligning |
| Dimension C | 5 in |
| Accelerated Speed | 450 fps |
| Inside Dia. Tolerance | +/-.001 |
| Dimension C1 | 3.978 in |
| Between Grooves (mm) | 3.978 in |
| Steady State Speed | 10 fps |
| Slot Width (In.) | 1.25 in |
| Length (In.) | 5 in |
| Dimension C2 | 0.12 |
| Required Housing Bore Dia. (In.) | 3.75 in |
| Dimension T | 2.5 |
| Slot Angle (Degrees) | 50 Degrees |
| Dynamic Load Capacity (N) | 1,380 lbf |
| System of Measurement | Inch |
| Minimum Operating Temperature | 0 Degrees F |
| Operating Temperature Range | 0 Degrees F to 500 Degrees F |
| Brand & Series | THOMSON Precision |
| Inside Dia. | 2 1/2 in |
| Series | Precision |
| Maximum Operating Temperature | 500 Degrees F |
| Included Wiper Seals | No Wipers |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |
Ball Bushing, Bore Dia 2.500 In, THOMSON, Mfr# OPN406080
$666,99
Free shipping will be applied on orders over $50
Linear Ball Bearing, Type Open, Inside Dia. 2 1/2 in, Outside Dia. 3 3/4 in, Material Steel, Accelerated Speed 450 fps, Between Grooves (mm) 3.978 in, Dimension B -, Dimension C 5 in, Dimension C1 3.978 in, Dimension C2 0.12, Dimension d -, Dimension E 1.25 in, Dimension F -, Dimension G -, Dimension T 2.5, Dynamic Load Capacity (N) 1,380 lbf, For Use With Thomson Shafting, Inside Dia. Tolerance +/-.001, Maximum Operating Temperature 500 Degrees F, Minimum Operating Temperature 0 Degrees F
9999 in stock
Must order in multiples of 1
Subtotal:
$666.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.