Item | Blower |
Type | Direct Drive Forward Curve |
Wheel Dia. (In.) | 7.875 in |
Voltage | 115/230 |
Motor HP | 1/4 hp |
Motor Type | General Duty, Single Phase |
Width (In.) | 12.6 in |
Wheel Type | Forward-Curved |
Motor Frame | 71 |
CFM @ 0.750-In. SP | 150 |
Motor RPM | 1,725 RPM |
Housing Finish | Polypropylene |
Depth (In.) | 13.78 in |
Inlet Dia. (In.) | 3.54 in |
Height (In.) | 20.15 in |
Material | Plastic Wheel & Plastic Housing |
dBA @ 5 Feet | 62 dBA |
Max. Ambient Temp. (F) | -13 Degrees F |
Outlet Dia. (In.) | 3.54 in |
Wheel Material | Plastic |
Agency Compliance | AMCA and CSA certified, UL Listed |
Wheel Width (In.) | 2.75 in |
Shaft Dia. (In.) | 14 mm |
CFM @ 0.500-In. SP | 100 |
Bearing Type | Sealed, Permanently Lubricated Ball |
CFM @ 1.000-In. SP | 175 |
Blower RPM | 1,725 RPM |
Full Load Amps | 4.04/2.02 |
Rotation | CCW |
Hz | 60 Hz |
Max. Inlet Temp. (Deg. F) | 140 Degrees F |
Motor Enclosure | Totally Enclosed Fan Cooled |
Phase | 1 |
Includes | Motor Mounting Base |
Housing Material | Plastic |
Mount Type | Motor Mount |
Frequency | 60 Hz |
Outlet Shape | Round |
Motor Horsepower | 1/3 hp |
Mounting Orientation | Multiposition |
Flange Type | Non-Flanged |
Overall Height | 20 1/8 in |
Number of Inlets | 1 |
For Air Type | Contaminated, Damp, Dirty and Dusty, Emergency Smoke Control, Clean Air, High Temperature |
Assembly | Assembled |
Includes Drive Package | Yes |
Standards | AMCA Certified, CSA Certified, UL Listed |
Airflow @ 0.500 in SP | 100 cfm |
Discharge Position | Bottom Horizontal, Down Blast, Top Horizontal, Up Blast |
Outlet Size | 3 1/2 in diameter |
Housing Height | 20 1/8 in |
Motor Enclosure Design_Table | Totally Enclosed Motor |
Overall Depth | 13 3/4 in |
Nominal Voltage | 115/230V AC |
Airflow @ Static Pressures | 175 cfm @ 1.000 in SP |
Thermal Overload Protection | Yes |
Airflow @ 0.750 in SP | 150 cfm |
Maximum Static Pressure | 1 1/4 in wc |
Airflow @ 1.000 in SP | 175 cfm |
Motor Frame Designation | 71 |
Inlet Type | Single-Inlet |
Maximum Fan Speed | 1,725 RPM |
Outlet Height | Not Applicable |
Wheel Diameter | 7 7/8 in |
Outlet Diameter | 3 1/2 in |
Housing Width | 12 9/16 in |
For Fan Speed (Dependent on Motor) | 1,725 RPM to 1,725 RPM |
Airflow @ 0.500 in SP Range | 0 to 999 cfm |
Wheel Width | 2 3/4 in |
Outlet Width | Not Applicable |
Sound Level | 62 dBA @ 5 ft |
Corrosion Resistant | Yes |
Shaft Diameter | 14 mm |
Flange Size | Not Applicable |
Motor Speed | 1,725 RPM |
Includes Motor | Yes |
Drive Type | Direct Drive |
Nameplate Voltage | 115/230V AC |
Outlet Shape_broad | Round |
Minimum Fan Speed | 1,725 RPM |
Flange Type_broad | Outlet |
Maximum Inlet Air Temperature | 140 Degrees F |
Minimum Ambient Temperature | -40 Degrees C |
Motor Enclosure Design | Totally Enclosed Fan-Cooled (TEFC) |
Includes Mounting Hardware | Yes |
Number of Discharge Positions | 2 |
Inlet Diameter | 3 1/2 in |
Maximum Ambient Temperature | -13 Degrees F |
Wheel Dimensions | 7 7/8 in Dia. x 2 3/4 in W |
Overall Width | 12 9/16 in |
Current | 4.04/2.02 A |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Blower, Forward Curve, 7 7/8 in, PLASTEC, Mfr# S12SS4P033
$1485,99
Free shipping will be applied on orders over $50
Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Assembled, Wheel Diameter 7 7/8 in, Airflow @ 0.500 in SP 100 cfm, Airflow @ 0.750 in SP 150 cfm, Airflow @ 1.000 in SP 175 cfm
9999 in stock
Must order in multiples of 1
Subtotal:
$1485.99
You must be logged in to post a review.
Reviews
There are no reviews yet.