HP | 3/4 hp |
Voltage | 115/230 |
Wetted Materials | Bronze Fitted, Cast Iron |
Seal Material | Buna-N/Carbon/Ceramic (Face) |
Max. Pressure | 300 psi |
Agency Compliance | UL and CSA on Motor Only |
Motor Enclosure | Open Dripproof (ODP) |
GPM @ 10 PSI | 7.5 |
GPM @ 20 PSI | 7.3 |
Includes | Cast Casing |
Motor Type | Capacitor-Start |
Duty | Continuous |
Impeller Material | Bronze |
Width | 6 3/4 in |
GPM @ 50 PSI | 6.8 |
Max. Specific Gravity | 1 |
Inlet (In.) | 1-1/4 |
Bearing Type | Sealed Ball Bearing (Motor Bearing) |
Manufacturers Warranty Length | 1 yr |
Height | 7 1/2 in |
Max. Dia. Solids | 25 Microns |
Outlet | 1 in |
Impeller Type | Regenerative Turbine |
Max. Case Pressure | 300 psi |
Phase | Single |
GPM @ 60 PSI | 6.6 |
GPM @ 75 PSI | 6.3 |
GPM @ 30 PSI | 7.0 |
Inlet Pressure | 200 psi |
Housing Material | Cast iron |
Best Efficiency GPM @ Head | 6.0 gpm @ 100 ft |
Frame | 56c |
Inlet | 1-1/4 in |
GPM @ 100 PSI | 6.0 |
Item | Turbine Pump |
Port Rotation | 90 Degrees Increments |
Features | 100% Tested, 300 lb Case Working Pressure, Low NPSH, Mechanical Seals, Non-Cavitating, Self-Adjusting Impeller, Shaft Sleeve, Steep Operating Characteristics, Volatile Fluid Handling, Water Flinger |
Overall Height | 7.5 in |
Standards | AISI 304, AISI 316, ASTM A48, ASTM B16, ASTM B62 |
Overall Width | 6.75 in |
Discharge Rotation | 90 Degrees Increments |
Flow Rate @ 120 psi | 5.65 gpm |
Flow Rate @ 60 psi | 6.6 gpm |
Duty Cycle | Continuous |
Maximum Feet of Head | 700 ft |
Flow Rate @ 240 psi | Not Applicable |
Flow Rate @ 90 psi | 6.15 gpm |
Frequency | 60 Hz |
Flow Rate @ 220 psi | Not Applicable |
Intake and Discharge Size | 1 1/4 in , 1 in |
Impeller Design | Regenerative Turbine |
Minimum Flow Rate | 2 gpm |
Maximum RPM | 3,450 RPM |
Flow Rate @ 140 psi | Not Applicable |
Maximum Flow Rate | 40 gpm |
Flow Rate @ 15 psi | Not Applicable |
Flow Rate @ 180 psi | Not Applicable |
Manufacturer Warranty Length | 1 yr |
Flow Rate @ 20 psi | 7.3 gpm |
Pump Housing Material | Cast Iron |
Seal Type | Mechanical, O-Ring, Sealless |
Flow Rate @ 40 psi | 7 gpm |
Electrical Connection Type | Plug-In |
Flow Rate @ 80 psi | 6.3 gpm |
Horsepower | 3/4 hp |
Discharge Type | NPT |
Number of Stages | 1 |
Flow Rate @ 10 psi | 7.5 gpm |
Wetted Material | Bronze Fitted, Cast Iron |
Thermal Overload Protection | Yes |
Compatible Intake Pipe Size | 1 1/4 in |
Shut Off Pressure (Maximum) | 160 psi |
Series | T51 |
Compatible Discharge Pipe Size | 1 in |
Minimum Media Temperature | -20 Degrees F |
NPSHr | 200 psi |
Maximum Media Temperature | 300 Degrees F |
Nameplate Voltage | 115/230V AC |
Motor Enclosure Type | ODP |
Compatible with Media Type | Water |
Flow Rate @ 260 psi | Not Applicable |
Motor Frame Designation | 56C |
Specific Gravity (Maximum) | 1 |
Solid Diameter (Maximum) | 25 micron |
Intake Type | NPT |
Flow Rate @ 160 psi | Not Applicable |
Flow Rate @ 30 psi | 7.2 gpm |
Flow Rate @ 70 psi | 6.4 gpm |
Best Efficiency Head | 100 ft |
Mounting Orientation | Horizontal, Vertical |
Flow Rate @ 200 psi | Not Applicable |
Case Pressure (Maximum) | 300 psi |
Flow Rate @ 100 psi | 6 gpm |
Flow Rate @ 50 psi | 6.8 gpm |
Operation | Manual |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Bronze-fitted Turbine Pump, DAYTON, Mfr# 4P915
$937,99
-$50.45 / ea
with subscription
Free shipping will be applied on orders over $50
Turbine Pump, Phase Single, Pump Housing Material Cast Iron, Motor Enclosure Open Dripproof, Horsepower 3/4 hp, Nameplate Voltage 115/230V AC, Shut Off Pressure (Maximum) 160 psi, Maximum Feet of Head 700 ft, Maximum Flow Rate 40 gpm, Flow Rate @ 10 psi 7.5 gpm, Flow Rate @ 20 psi 7.3 gpm, Flow Rate @ 30 psi 7.2 gpm, Compatible Intake Pipe Size 1 1/4 in, Compatible Discharge Pipe Size 1 in, Discharge Type NPT, Motor Type Capacitor-Start, Best Efficiency Head 100 ft
9999 in stock
Must order in multiples of 1
Subtotal:
$937.99
You must be logged in to post a review.
Reviews
There are no reviews yet.