HP | 1 hp |
Item | Chemical Resistant Centrifugal Pump |
Housing Material | Polypropylene |
Phase | Three |
Voltage | 208-230/460 |
Max. GPM @ Head | 55 gpm @ 10 ft |
Max. Head | 79 ft |
Best Efficiency GPM @ Head | 38 gpm @ 50 ft |
Inlet | 1-1/2 in NPT |
Outlet | 1-1/2 in NPT |
Motor Enclosure | Open Dripproof |
Screw Material | Stainless Steel |
GPM of Water @ 30 Ft. of Head | 48 |
GPM of Water @ 25 Ft. of Head | 50 |
Length | 15 15/64 in |
GPM of Water @ 60 Ft. of Head | 28 |
Height | 7 1/2 in |
Hz | 60 |
Shaft Material | Stainless Steel |
NEMA/IEC Frame | 56J |
Max. Fluid Viscosity | 100 SUS |
Max. Case Pressure | 100 psi |
Volute Material | Polypropylene |
GPM of Water @ 15 Ft. of Head | 54 |
Bearing Type | Ball |
Max. Dia. Solids | 1/4 in |
Application | Aggressive Liquid Applications, and Other General Purpose Pumping, Booster Service, Irrigation, Jockey Pump Service, Moderate Flow at Moderate Head Pressure, Spraying Systems, Transfer of Non-Flammable Liquids, Water Circulation |
Drain Plug | Yes |
Duty | Continuous |
Inlet Pressure | 75 psi |
GPM of Water @ 50 Ft. of Head | 38 |
GPM of Water @ 40 Ft. of Head | 44 |
Amps | 3.7-3.2/1.6 |
Best Efficiency Range GPM @ Head | 21 to 50 gpm @ 65 to 25 ft |
Impeller Type | Closed |
Wetted Materials | Buna-N, Carbon, Ceramic, Polypropylene, Stainless Steel |
Includes | Manual |
Motor RPM | 3,450 RPM |
Seal Type | Mechanical |
Manufacturers Warranty Length | 1 yr |
Port Rotation | None |
GPM of Water @ 20 Ft. of Head | 53 |
GPM of Water @ 10 Ft. of Head | 55 |
Width | 7 5/8 in |
GPM of Water @ 70 Ft. of Head | 14 |
Impeller Material | Polypropylene |
Service Factor | 1.4 |
Seal Material | Buna-N, Carbon, Ceramic, Stainless Steel |
Max. Specific Gravity | 1.0 |
Max. Liquid Temp. | 140 Degrees F |
Agency Compliance | c UL us |
Min. GPM @ Head | 14 gpm @ 70 ft |
Motor Type | Not Applicable |
Overall Length | 15.2 in |
Overall Height | 7.5 in |
Overall Width | 7.6 in |
Standards | cULus Listed |
Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
Shut Off Pressure (Maximum) | 72 ft of head |
Flow Rate @ 40 ft of Head (Maximum) | 44 gpm |
Feet of Head (Maximum) | 79 ft |
Duty Cycle | Continuous |
Ambient Temperature (Maximum) | 104 Degrees F |
Motor Speed (Maximum) | 3,450 RPM |
Discharge Pipe Type | NPT |
Case Pressure (Maximum) | 100 psi |
Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
Suction Port | 1 1/2 in NPT |
Wetted Material | Buna-N, Carbon, Ceramic, Polypropylene, Stainless Steel |
Best Efficiency Head | 50 ft |
Flow Rate @ 25 ft of Head (Maximum) | 50 gpm |
Ambient Temperature (Minimum) | Not Applicable |
Compatible Motor Frame | 56J NEMA |
Electrical Connection Type | Hardwired |
Current | 3.7 to 3.2 or 1.6 A |
Horsepower (Maximum) | 1 hp |
Solid Diameter (Maximum) | 0.25 in |
Flow Rate @ 60 ft of Head (Maximum) | 28 gpm |
Flow Rate @ 10 ft of Head (Maximum) | 55 gpm |
Discharge Port | 1 1/2 in NPT |
Viscosity (Maximum) | 100 SUS |
Best Efficiency Flow | 38 gpm |
Frequency | 60 Hz |
Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
Flow Rate (Maximum) | 55 gpm |
Intake Pipe Size | 1 1/2 in |
Nameplate Voltage | 208-230/460V AC |
Flow Rate @ 15 ft of Head (Maximum) | 54 gpm |
Priming | Manual |
Cord Length | Not Applicable |
Impeller Design | Closed |
Intake Pipe Type | NPT |
Discharge Rotation | None |
Specific Gravity (Maximum) | 1 |
Shaft Outer Diameter | 5/8 in |
Discharge Pipe Size | 1 1/2 in |
Flow Rate @ 70 ft of Head (Maximum) | 14 gpm |
Media Temperature (Minimum) | Not Applicable |
Flow Rate (Minimum) | 14 gpm |
Flow Rate @ 30 ft of Head (Maximum) | 48 gpm |
Media Temperature (Maximum) | 140 Degrees F |
For Use With Potable Systems | No |
Flow Rate @ 20 ft of Head (Maximum) | 53 gpm |
Country of Origin (subject to change) | India |
Package Quantity | 1 |
Centrifugal Pump, 1 HP, 3 Ph, 208-230/460V, Hz: 60, DAYTON, Mfr# 2YER8
$787,99
-$23.64 / ea
with subscription
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 1 1/2 in, Discharge Pipe Type NPT, Feet of Head (Maximum) 79 ft, Flow Rate (Maximum) 55 gpm, Horsepower (Maximum) 1 hp, Housing Material Polypropylene, Impeller Design Closed, Impeller Material Polypropylene, Intake Pipe Size 1 1/2 in, Intake Pipe Type NPT, Media Temperature (Maximum) 140 Degrees F, Phase Three, Shut Off Pressure (Maximum) 72 ft of head, Viscosity (Maximum) 100 SUS, Flow Rate @ 10 ft of Head (Maximum) 55 gpm
9999 in stock
Must order in multiples of 1
Subtotal:
$787.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.