Item | Chemical Resistant Centrifugal Pump |
HP | 2 hp |
Housing Material | Polypropylene |
Phase | Three |
Voltage | 208-230/460 |
Max. GPM @ Head | 96 gpm @ 10 ft |
Max. Head | 91 ft |
Inlet | 1-1/2 in NPT |
Best Efficiency GPM @ Head | 58 gpm @ 60 ft |
Outlet | 1-1/2 in NPT |
Motor Enclosure | Totally Enclosed Fan Cooled |
Duty | Continuous |
Motor RPM | 3,450 RPM |
Screw Material | Stainless Steel |
GPM of Water @ 15 Ft. of Head | 92 |
Seal Material | Buna-N, Carbon, Ceramic, Stainless Steel |
Max. Fluid Viscosity | 100 SUS |
Height | 7 1/2 in |
Inlet Pressure | 75 psi |
Max. Dia. Solids | 1/4 in |
Width | 7 5/8 in |
Seal Type | Mechanical |
GPM of Water @ 20 Ft. of Head | 99 gpm |
GPM of Water @ 70 Ft. of Head | 47 |
Shaft Material | Stainless Steel |
Volute Material | Polypropylene |
GPM of Water @ 10 Ft. of Head | 102 gpm |
Max. Specific Gravity | 1.0 |
Impeller Type | Closed |
Hz | 60 |
GPM of Water @ 40 Ft. of Head | 82 gpm |
Drain Plug | Yes |
GPM of Water @ 30 Ft. of Head | 91 gpm |
GPM of Water @ 60 Ft. of Head | 64 gpm |
Min. GPM @ Head | 31 gpm @ 80 ft |
Wetted Materials | Buna-N, Carbon, Ceramic, Polypropylene, Stainless Steel |
GPM of Water @ 50 Ft. of Head | 73 gpm |
GPM of Water @ 80 Ft. of Head | Not Applicable |
Manufacturers Warranty Length | 1 yr |
Amps | 5.0/2.5 |
Includes | Manual |
Application | Aggressive Liquid Applications, and Other General Purpose Pumping, Booster Service, Irrigation, Jockey Pump Service, Moderate Flow at Moderate Head Pressure, Spraying Systems, Transfer of Non-Flammable Liquids, Water Circulation |
Best Efficiency Range GPM @ Head | 40 to 83 gpm @ 75 to 30 ft |
Port Rotation | None |
Length | 16 5/32 in |
Bearing Type | Ball |
NEMA/IEC Frame | 56J |
Impeller Material | Polypropylene |
Max. Liquid Temp. | 140 Degrees F |
Max. Case Pressure | 100 psi |
Service Factor | 1.2 |
Agency Compliance | c UL us |
GPM of Water @ 25 Ft. of Head | 95 gpm |
Motor Type | Not Applicable |
Overall Length | 16.2 in |
Overall Height | 7.5 in |
Overall Width | 7.6 in |
Standards | cULus Listed |
Ambient Temperature (Minimum) | Not Applicable |
Solid Diameter (Maximum) | 0.25 in |
For Use With Potable Systems | No |
Ambient Temperature (Maximum) | 104 Degrees F |
Shut Off Pressure (Maximum) | 82 ft of head |
Impeller Design | Closed |
Best Efficiency Head | 60 ft |
Discharge Pipe Size | 1 1/2 in |
Shaft Outer Diameter | 5/8 in |
Current | 5.0 or 2.5 A |
Nameplate Voltage | 208-230/460V AC |
Horsepower (Maximum) | 2 hp |
Flow Rate @ 25 ft of Head (Maximum) | 95 gpm |
Intake Pipe Size | 1 1/2 in |
Suction Port | 1 1/2 in NPT |
Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 80 ft of Head (Maximum) | 31 gpm |
Specific Gravity (Maximum) | 1 |
Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
Intake Pipe Type | NPT |
Flow Rate @ 10 ft of Head (Maximum) | 102 gpm |
Best Efficiency Flow | 58 gpm |
Media Temperature (Maximum) | 140 Degrees F |
Frequency | 60 Hz |
Priming | Manual |
Media Temperature (Minimum) | Not Applicable |
Flow Rate (Minimum) | 31 gpm |
Compatible Motor Frame | 56J NEMA |
Flow Rate @ 40 ft of Head (Maximum) | 82 gpm |
Wetted Material | Buna-N, Carbon, Ceramic, Polypropylene, Stainless Steel |
Flow Rate @ 70 ft of Head (Maximum) | 47 gpm |
Viscosity (Maximum) | 100 SUS |
Case Pressure (Maximum) | 100 psi |
Feet of Head (Maximum) | 91 ft |
Discharge Rotation | None |
Flow Rate @ 60 ft of Head (Maximum) | 64 gpm |
Discharge Pipe Type | NPT |
Flow Rate @ 15 ft of Head (Maximum) | 92 gpm |
Flow Rate @ 30 ft of Head (Maximum) | 91 gpm |
Flow Rate (Maximum) | 96 gpm |
Duty Cycle | Continuous |
Cord Length | Not Applicable |
Motor Speed (Maximum) | 3,450 RPM |
Flow Rate @ 20 ft of Head (Maximum) | 99 gpm |
Discharge Port | 1 1/2 in NPT |
Electrical Connection Type | Hardwired |
Country of Origin (subject to change) | India |
Package Quantity | 1 |
Centrifugal Pump, 2 HP, 3 Ph, 208-230/460V, Width: 7 5/8 in, DAYTON, Mfr# 2YEU3
$992,99
-$28.8 / ea
with subscription
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 1 1/2 in, Discharge Pipe Type NPT, Feet of Head (Maximum) 91 ft, Flow Rate (Maximum) 96 gpm, Horsepower (Maximum) 2 hp, Housing Material Polypropylene, Impeller Design Closed, Impeller Material Polypropylene, Intake Pipe Size 1 1/2 in, Intake Pipe Type NPT, Media Temperature (Maximum) 140 Degrees F, Phase Three, Shut Off Pressure (Maximum) 82 ft of head, Viscosity (Maximum) 100 SUS, Flow Rate @ 10 ft of Head (Maximum) 102 gpm
0 in stock
Must order in multiples of 1
Subtotal:
$992.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.