HP | 3 hp |
Item | Chemical Resistant Centrifugal Pump |
Housing Material | Noryl |
Phase | Single |
Voltage | 230 |
Max. GPM @ Head | 123 gpm @ 10 ft |
Max. Head | 95 ft |
Inlet | 1-1/2 in NPT |
Best Efficiency GPM @ Head | 80 gpm @ 60 ft |
Outlet | 1-1/2 in NPT |
Motor Enclosure | Totally Enclosed Fan Cooled |
GPM of Water @ 25 Ft. of Head | 110 |
Volute Material | Noryl |
NEMA/IEC Frame | 56J |
Max. Specific Gravity | 1.0 |
GPM of Water @ 50 Ft. of Head | 86 |
GPM of Water @ 40 Ft. of Head | 97 |
Seal Type | Mechanical |
Impeller Type | Closed |
GPM of Water @ 60 Ft. of Head | 76 |
Impeller Material | Noryl |
Wetted Materials | Carbon, Ceramic, Noryl, Viton |
Port Rotation | None |
Shaft Material | Stainless Steel |
Motor RPM | 3,450 RPM |
Service Factor | 1 |
GPM of Water @ 15 Ft. of Head | 119 |
GPM of Water @ 20 Ft. of Head | 115 |
Duty | Continuous |
Best Efficiency Range GPM @ Head | 48 to 106 gpm @ 80 to 30 ft |
GPM of Water @ 70 Ft. of Head | 63 |
Max. Liquid Temp. | 180 Degrees F |
Max. Case Pressure | 100 psi |
Length | 15 7/8 in |
Max. Dia. Solids | 1/4 in |
Manufacturers Warranty Length | 1 yr |
Includes | Manual |
Width | 7 5/8 in |
Drain Plug | Yes |
Screw Material | Stainless Steel |
Min. GPM @ Head | 48 gpm @ 80 ft |
GPM of Water @ 30 Ft. of Head | 106 |
GPM of Water @ 80 Ft. of Head | 48 |
Application | Aggressive Liquid Applications, and Other General Purpose Pumping, Booster Service, Irrigation, Jockey Pump Service, Moderate Flow at Moderate Head Pressure, Spraying Systems, Transfer of Non-Flammable Liquids, Water Circulation |
Seal Material | Carbon, Ceramic, Noryl, Viton |
Inlet Pressure | 75 psi |
Amps | 12.5 |
Max. Fluid Viscosity | 100 SUS |
Agency Compliance | c UL us |
Height | 7 1/2 in |
Hz | 60 |
GPM of Water @ 10 Ft. of Head | 123 |
Bearing Type | Ball |
Motor Type | Capacitor Start Capacitor Run |
Standards | cULus Listed |
Overall Height | 7.5 in |
Overall Length | 15.9 in |
Overall Width | 7.6 in |
Cord Length | Not Applicable |
Flow Rate @ 80 ft of Head (Maximum) | 48 gpm |
Flow Rate @ 25 ft of Head (Maximum) | 110 gpm |
Motor Speed (Maximum) | 3,450 RPM |
Duty Cycle | Continuous |
Case Pressure (Maximum) | 100 psi |
Viscosity (Maximum) | 100 SUS |
Flow Rate @ 40 ft of Head (Maximum) | 97 gpm |
Feet of Head (Maximum) | 95 ft |
Flow Rate @ 70 ft of Head (Maximum) | 63 gpm |
Flow Rate (Minimum) | 48 gpm |
Discharge Pipe Type | NPT |
Nameplate Voltage | 230V AC |
Frequency | 60 Hz |
Flow Rate @ 60 ft of Head (Maximum) | 76 gpm |
Electrical Connection Type | Hardwired |
Flow Rate @ 20 ft of Head (Maximum) | 115 gpm |
Flow Rate @ 15 ft of Head (Maximum) | 119 gpm |
Best Efficiency Flow | 80 gpm |
Shut Off Pressure (Maximum) | 85 ft of head |
Impeller Design | Closed |
Media Temperature (Maximum) | 180 Degrees F |
Ambient Temperature (Maximum) | 104 Degrees F |
Discharge Port | 1 1/2 in NPT |
Intake Pipe Type | NPT |
Flow Rate @ 10 ft of Head (Maximum) | 123 gpm |
Solid Diameter (Maximum) | 0.25 in |
Compatible Motor Frame | 56J NEMA |
Best Efficiency Head | 60 ft |
Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
Priming | Manual |
Specific Gravity (Maximum) | 1 |
Flow Rate (Maximum) | 123 gpm |
Intake Pipe Size | 1 1/2 in |
Flow Rate @ 30 ft of Head (Maximum) | 106 gpm |
Current | 12.5 A |
Discharge Rotation | None |
Discharge Pipe Size | 1 1/2 in |
Suction Port | 1 1/2 in NPT |
Ambient Temperature (Minimum) | Not Applicable |
Media Temperature (Minimum) | Not Applicable |
Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
Horsepower (Maximum) | 3 hp |
For Use With Potable Systems | No |
Shaft Outer Diameter | 5/8 in |
Wetted Material | Carbon, Ceramic, Noryl, Viton |
Country of Origin (subject to change) | India |
Package Quantity | 1 |
Centrifugal Pump, 3 HP, 1 Ph, 230V, DAYTON, Mfr# 2YEW6
$1089,99
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 1 1/2 in, Discharge Pipe Type NPT, Feet of Head (Maximum) 95 ft, Flow Rate (Maximum) 123 gpm, Horsepower (Maximum) 3 hp, Housing Material Noryl, Impeller Design Closed, Impeller Material Noryl, Intake Pipe Size 1 1/2 in, Intake Pipe Type NPT, Media Temperature (Maximum) 180 Degrees F, Phase Single, Shut Off Pressure (Maximum) 85 ft of head, Viscosity (Maximum) 100 SUS, Flow Rate @ 10 ft of Head (Maximum) 123 gpm, Flow Rate @ 15 ft of Head (Maximum) 119 gpm
0 in stock
Must order in multiples of 1
Subtotal:
$1089.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.