Shaft Locking Type - Couplings | 2 Piece Clamp |
Item | Rigid Shaft Coupling |
System of Measurement | Inch |
Bore Dia. | 1/4 in x 3/8 in |
Material - Couplings | Steel |
Outside Dia. | 7/8 in |
Overall Length | 1 3/8 in |
With Keyway / Without Keyway | Without Keyway |
Finish | black oxide |
Application | For Applications where Alignment is Critical, Particularly when no Backlash is Desired and Flexibility is not Required, Useful when Timing, Joining and/or Aligning Shafts at Lower Speeds and Torque |
Type | Two Piece Clamp Type, Without Keyway |
Machined From | Bar Stock |
Screw Size (In.) | #6-32 |
Max. Torque (In.-Lbs.) | 475 |
Provides | Extra Holding Power for Higher Load Applications without Marring Shafts |
Item - Rigid Shaft Couplings | Rigid Shaft Coupling |
Clearance Dia. (In.) | 1.033 |
Clearance Dia. | 1.033 in |
Standards | ANSI, Conflict Minerals Compliant, REACH Compliant, RoHS3 Compliant |
Design | Four Vibration Resistant Socket Capscrews |
Screw Size | #6-32 |
Material | Black Oxide Steel |
Max. Torque | 475 in-lb |
Screw Material | Alloy Steel |
Bore Tolerance | +0.0020 in / +0.0005 in |
Screw Location from Center | 0.313 in |
Different Bore Sizes | Yes |
Coupling Material Grade | 1215 |
Maximum Operating Temperature | 350 Degrees F |
Minimum Operating Temperature | -40 Degrees F |
Keyway Depth 1 | Not Applicable |
Number of Locking Screws | 8 |
Keyway Width 2 | Not Applicable |
Bore Diameter 1 | 3/8 in |
Minimum Bore Diameter | 1/4 in |
Keyway Depth 2 | Not Applicable |
Keyway Width 1 | Not Applicable |
Screw Thread Size | #6-32 |
Recommended Gap | 0.063 in |
Fastener Tightening Torque | 28 lb-in |
Resistance Properties | Corrosion Resistant |
Features | Precision Honed Bores, Vibration-Resistant Screws |
Coupling Material | Carbon Steel |
Bore Diameter 2 | 1/4 in |
Screw Material Finish | Black Oxide |
Shaft Locking Type | Clamp On |
Coupling Construction | Two-Piece |
Maximum Torque | 475 in-lb |
Zero Backlash | Yes |
Clearance Diameter | 1.03 in |
Included Screws | (8) Clamp Screws |
Coupling Outside Diameter | 7/8 in |
Coupling Material Finish | Black Oxide |
Shaft Tolerance | +0.0000 in / -0.0005 in |
Maximum Speed | 4,000 RPM |
Maximum Bore Diameter | 3/8 in |
Bore Type | Round |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, Two Piece, Bore Dia 3/8 x 1/4 In, RULAND, Mfr# SPX-6-4-F
$55,69
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Rigid Shaft Coupling, Bore Diameter 1 3/8 in, Bore Diameter 2 1/4 in, Bore Type Round, Clearance Diameter 1.03 in, Coupling Construction Two-Piece, Coupling Material Carbon Steel, Coupling Outside Diameter 7/8 in, Different Bore Sizes Yes, Keyway Depth 1 Not Applicable, Keyway Depth 2 Not Applicable, Minimum Bore Diameter 1/4 in, Keyway Width 1 Not Applicable, Keyway Width 2 Not Applicable, Maximum Bore Diameter 3/8 in, Maximum Speed 4,000 RPM, Maximum Torque 475 in-lb, Overall Length 1 3/8 in
9999 in stock
Must order in multiples of 1
Subtotal:
$55.69
You must be logged in to post a review.
Reviews
There are no reviews yet.