Item | Rigid Shaft Coupling |
Shaft Locking Type - Couplings | 1 Piece Clamp |
System of Measurement | Inch |
Bore Dia. | 1/2 in |
Material - Couplings | 303 Stainless Steel |
Outside Dia. | 1 1/8 in |
Overall Length | 1 3/4 in |
With Keyway / Without Keyway | Without Keyway |
Finish | Bright |
Max. Torque | 275 in-lb |
Material | 303 Stainless Steel |
Clearance Dia. | 1.328 in |
Provides | Extra Holding Power for Higher Load Applications without Marring Shafts |
Application | For Applications where Alignment is Critical, Particularly when no Backlash is Desired and Flexibility is not Required, Useful when Timing, Joining and/or Aligning Shafts at Lower Speeds and Torque |
Screw Size | #8-32 |
Design | Four Vibration Resistant Socket Capscrews |
Machined From | Bar Stock |
Clearance Dia. (In.) | 1.328 |
Screw Size (In.) | #8-32 |
Item - Rigid Shaft Couplings | Rigid Shaft Coupling |
Standards | ANSI, Conflict Minerals Compliant, REACH Compliant, RoHS3 Compliant |
Max. Torque (In.-Lbs.) | 275 |
Type | One Piece Clamp Type, Without Keyway |
Bore Tolerance | +0.0020 in / +0.0005 in |
Screw Material | Stainless Steel |
Screw Location from Center | 0.43 in |
Keyway Width 2 | Not Applicable |
Included Screws | (4) Clamp Screws |
Keyway Depth 2 | Not Applicable |
Recommended Gap | Not Applicable |
Zero Backlash | Yes |
Resistance Properties | Corrosion Resistant |
Bore Type | Round |
Bore Diameter 1 | 1/2 in |
Coupling Material | Stainless Steel |
Minimum Operating Temperature | -40 Degrees F |
Maximum Speed | 4,000 RPM |
Minimum Bore Diameter | 1/2 in |
Keyway Width 1 | Not Applicable |
Different Bore Sizes | No |
Screw Thread Size | #8-32 |
Features | Precision Honed Bores, Vibration-Resistant Screws |
Clearance Diameter | 1.33 in |
Number of Locking Screws | 4 |
Keyway Depth 1 | Not Applicable |
Screw Material Finish | Bright |
Maximum Torque | 275 in-lb |
Coupling Construction | One-Piece |
Coupling Material Finish | Bright |
Coupling Outside Diameter | 1 1/8 in |
Maximum Operating Temperature | 350 Degrees F |
Screw Material Grade | 18-8 300 Series |
Shaft Locking Type | Clamp On |
Fastener Tightening Torque | 28 lb-in |
Shaft Tolerance | +0.0000 in / -0.0005 in |
Maximum Bore Diameter | 1/2 in |
Coupling Material Grade | 303 |
Bore Diameter 2 | 1/2 in |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, One Piece, Bore Dia 1/2 In, RULAND, Mfr# CLX-8-8-SS
$58,39
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Rigid Shaft Coupling, Bore Diameter 1 1/2 in, Bore Diameter 2 1/2 in, Bore Type Round, Clearance Diameter 1.33 in, Coupling Construction One-Piece, Coupling Material Stainless Steel, Coupling Outside Diameter 1 1/8 in, Different Bore Sizes No, Keyway Depth 1 Not Applicable, Keyway Depth 2 Not Applicable, Minimum Bore Diameter 1/2 in, Keyway Width 1 Not Applicable, Keyway Width 2 Not Applicable, Maximum Bore Diameter 1/2 in, Maximum Speed 4,000 RPM, Maximum Torque 275 in-lb
9999 in stock
Must order in multiples of 1
Subtotal:
$58.39
You must be logged in to post a review.
Reviews
There are no reviews yet.