| Item - Jaw Coupling Hubs | Curved Jaw Coupling Hub |
| Size - Jaw Couplings | MJC33 |
| Bore Dia. | 10 mm |
| Keyway Size Type | None |
| Material - Hubs | Aluminum |
| Outside Dia. | 33.3 mm |
| Assembled Coupling Length | 44.3 mm |
| Item | Jaw Coupling Hub |
| Material | Aluminum |
| Overall Length | 44.3 mm |
| Keyway Size | None |
| Size | MJC33 |
| Minimum Operating Temperature | -23 Degrees C |
| Length through Bore | 15 mm |
| Full Bearing Support Required | Yes |
| Hub Material Finish | Bright |
| Bore Diameter | 10 mm |
| Jaw Profile | Curved |
| Maximum Speed | 8,000 RPM |
| Keyway Depth | Not Applicable |
| Screw Material Finish | Black Oxide |
| Weight | 0.1 lb |
| Zero Backlash | Yes |
| Hub Material | Aluminum |
| Recommended Hub Gap | 0.8 mm |
| Fail Safe | Yes |
| Maximum Operating Temperature | 82 Degrees C |
| Bore Tolerance | +0.05/-0.00 mm |
| Hub Projection | 15 mm |
| Shaft Tolerance | +0.000/-0.013 mm |
| Shaft Locking Type | Clamp On |
| Hub Diameter | 33.3 mm |
| Screw Thread Size | M3 |
| Bore Type | Round Bore |
| Screw Material | Alloy Steel |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015, REACH Compliant, RoHS Compliant |
| Outside Diameter | 33.3 mm |
| System of Measurement | Metric |
| Included Screws | Hex Socket Cap Screw |
| Coupling Overall Length | 44.5 mm |
| Hub Material Grade | 2024 |
| Keyway Width | Not Applicable |
| Number of Locking Screws | 1 |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Jaw Coupling Hub, 10mm, Aluminum, RULAND, Mfr# MJC33-10-A
$33,99
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Jaw Coupling Hub, Coupling Size MJC33, Outside Diameter 33.3 mm, Coupling Overall Length 44.5 mm, System of Measurement Metric, Hub Material Aluminum, Maximum Speed 8,000 RPM, Keyway Depth Not Applicable, Keyway Width Not Applicable, Bore Diameter 10 mm, Shaft Locking Type Clamp On, Bore Type Round Bore, Jaw Profile Curved, Screw Thread Size M3, Bore Tolerance +0.05/-0.00 mm, Fail Safe Yes, Shaft Tolerance +0.000/-0.013 mm, Full Bearing Support Required Yes, Hub Diameter 33.3 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$33.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.