| Item - Jaw Coupling Hubs | Curved Jaw Coupling Hub |
| Size - Jaw Couplings | MJC41 |
| Bore Dia. | 16 mm |
| Keyway Size Type | None |
| Material - Hubs | Aluminum |
| Outside Dia. | 1.63 in |
| Assembled Coupling Length | 53 mm |
| Overall Length | 53 mm |
| Size | MJC41 |
| Item | Jaw Coupling Hub |
| Keyway Size | None |
| Material | Aluminum |
| Coupling Size | MJC41 |
| Hub Projection | 18 mm |
| Fail Safe | Yes |
| Bore Tolerance | +0.05/-0.00 mm |
| Maximum Speed | 8,000 RPM |
| Minimum Operating Temperature | -23 Degrees C |
| Full Bearing Support Required | Yes |
| Hub Diameter | 41.3 mm |
| Bore Diameter | 16 mm |
| Shaft Tolerance | +0.000/-0.013 mm |
| Coupling Overall Length | 53 mm |
| Maximum Operating Temperature | 82 Degrees C |
| Outside Diameter | 41.3 mm |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015, REACH Compliant, RoHS3 Compliant |
| Zero Backlash | Yes |
| Hub Material Grade | 2024-T351 |
| Jaw Profile | Curved |
| Hub Material | Aluminum |
| Hub Material Finish | Bright |
| Screw Material | Alloy Steel |
| Included Screws | Hex Socket Cap Screw |
| Length through Bore | 18 mm |
| Screw Thread Size | M4 |
| Weight | 0.1 lb |
| Shaft Locking Type | Clamp On |
| System of Measurement | Metric |
| Keyway Depth | Not Applicable |
| Screw Material Finish | Black Oxide |
| Recommended Hub Gap | 1.3 mm |
| Keyway Width | Not Applicable |
| Bore Type | Round Bore |
| Number of Locking Screws | 1 |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Jaw Cplg Hub, Bore Dia 16 mm, Size MJC41, RULAND, Mfr# MJC41-16-A
$46,19
Free shipping will be applied on orders over $50
Jaw Coupling Hub, Coupling Size MJC41, Outside Diameter 41.3 mm, Coupling Overall Length 53 mm, System of Measurement Metric, Hub Material Aluminum, Maximum Speed 8,000 RPM, Keyway Depth Not Applicable, Keyway Width Not Applicable, Bore Diameter 16 mm, Shaft Locking Type Clamp On, Bore Type Round Bore, Jaw Profile Curved, Screw Thread Size M4, Bore Tolerance +0.05/-0.00 mm, Fail Safe Yes, Shaft Tolerance +0.000/-0.013 mm, Full Bearing Support Required Yes, Hub Diameter 41.3 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$46.19
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.