| Inlet and Outlet Dia. (In.) | 8 to 12 |
| Item | Draft Inducer |
| Type | Inducer |
| Voltage | 115 |
| Depth (In.) | 9 7/16 in |
| Cut Out Required | 8-3/8 in |
| Construction Material | Galvanized Steel |
| Amps | 1.1 |
| Includes | DI/CK Adapter Kit, Pressure Sensing Tube |
| Remarks | Used to Exhaust Heating Appliances |
| Height (In.) | 6 7/16 in |
| Vent Pipe Dia. (In.) | 5 to 8 |
| Agency Compliance | ETL |
| Width (In.) | 9 3/16 in |
| Application | Boilers, Furnaces, Water Heaters |
| Watts | 78 W |
| BtuH Input | 279,000 to 353,000 |
| Duct Temp. Deg. (F) | 650 Degrees F |
| CFM @ 0.000-In. SP | 190 210 225 240 |
| Outlet Width | Not Applicable |
| Maximum Vent Pipe Diameter | 8 in |
| Inlet Diameter | 8 in |
| Maximum Static Pressure | 0 in wc |
| Maximum Motor Speed | 1,550 RPM |
| Phase | 1 |
| Airflow @ 0.000 in SP | 0.786 cfm |
| Wheel Type | Radial |
| Housing Material Finish | Galvanized |
| Maximum Fan Speed | 1,550 RPM |
| Outlet Height | Not Applicable |
| Pipe Slot: Height x Width | 5 1/8 in x 8 1/2 in |
| Nominal Voltage | 115V AC |
| For Appliance Type | Oil or Gas-Fired Furnaces, Water Heaters, Boilers |
| For Pipe Slot Height | 5 1/8 in |
| Motor Type | Permanent Split Capacitor |
| Nameplate Voltage | 115V AC |
| Outlet Diameter | 12 in |
| Overall Height | 9 3/8 in |
| Wheel Diameter | 8 7/8 in |
| Power Consumption | 78 W |
| Manufacturer Warranty Length | 18 mo |
| Overall Width | 9 1/8 in |
| Housing Material | Steel |
| Maximum Heater BTU Input for Oil Appliance | 412,000 BtuH |
| For Vent Pipe Diameter | 8 in |
| Minimum Vent Pipe Diameter | 5 in |
| Current | 1.1 A |
| Frequency | 60 Hz |
| For Pipe Slot Width | 8 1/2 in |
| Standards | cETLus Listed |
| Outlet Shape | Round |
| Overall Depth | 8 3/8 in |
| Overall HxWxD | 9 3/8 in x 9 1/8 in x 8 3/8 in |
| For Pipe Diameter | 5 in to 8 in |
| Wheel Material | Steel |
| Compatible with Brand | Universal |
| Maximum Heater BTU Input for Gas Appliance | 353,000 BtuH |
| For Fuel Type | Coal, Natural Gas, Oil |
| Blower Type | Induced Draft Blower |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Draft Inducer, 115, Galvanized Steel, 6 7/16 in H., FIELD CONTROLS, Mfr# DI-2
$341,99
-$10.26 / ea
with subscription
Free shipping will be applied on orders over $50
Draft Inducer, Application Boilers, Furnaces, Water Heaters, For Fuel Type Coal, Natural Gas, Oil, For Appliance Type Oil or Gas-Fired Furnaces, Water Heaters, Boilers, Maximum Vent Pipe Diameter 8 in, Minimum Vent Pipe Diameter 5 in, For Pipe Slot Height 5 1/8 in, For Pipe Slot Width 8 1/2 in, Maximum Heater BTU Input for Gas Appliance 353,000 BtuH, Maximum Heater BTU Input for Oil Appliance 412,000 BtuH, Inlet Diameter 8 in, Outlet Diameter 12 in, For Vent Pipe Diameter 8 in
9999 in stock
Must order in multiples of 1
Subtotal:
$341.99
You must be logged in to post a review.
Reviews
There are no reviews yet.