Promotion Restriction | Not eligible for promotion |
HP | 1 1/2 hp |
Item | Hazardous Location Centrifugal Pump |
Housing Material | 316 Stainless Steel |
Phase | Three |
Inlet (In.) | 1-1/2 NPT |
Voltage | 208-230/460 |
Inlet | 1-1/2 in NPT |
Best Efficiency GPM @ Head | 42 @ 50 ft |
Outlet | 1-1/4 in NPT |
Motor Enclosure | Totally Enclosed Fan Cooled |
Max. Case Pressure | 150 psi |
Bearing Type | Ball |
Motor Type | Three-Phase Induction |
GPM of Water @ 40 Ft. of Head | 61 |
GPM of Water @ 70 Ft. of Head | 3 |
Width | 11 13/16 in |
GPM of Water @ 20 Ft. of Head | 88 |
Seal Material | Carbon, Ceramic, Viton |
Hazardous Location Class | Class I Division 1, Class II Division 2 |
Inlet Pressure | 122 psi |
Amps | 4.09-3.72/1.86 |
Duty | Continuous |
Temp. Code | T3C |
Agency Compliance | UL Listed for Class I Groups C and D and Class II Groups E, F and G |
Includes | Manual |
Max. Dia. Solids | 1/8 |
Motor RPM | 3,450 RPM |
Motor Ambient Temp. Rating | 140 Degrees F |
Manufacturers Warranty Length | 1 yr |
GPM of Water @ 30 Ft. of Head | 78 |
Impeller Material | Stainless Steel |
Port Rotation | 90 Degrees Increments |
GPM of Water @ 60 Ft. of Head | 21 |
Frame | 143TC |
GPM of Water @ 25 Ft. of Head | 82 |
Hz | 60 |
Impeller Type | Closed |
Height | 9 1/4 in |
Max. Specific Gravity | 1 |
Wetted Materials | Carbon/Ceramic, Stainless Steel, Viton |
For Use With | Can Be Used with Nonflammable and Nonabrasive Liquids |
GPM of Water @ 50 Ft. of Head | 42 |
Seal Type | Mechanical |
Volute Material | 316 Stainless Steel |
Shaft Material | Stainless Steel |
Service Factor | 1.15 |
Overall Width | 13 in |
Standards | CUS |
Overall Height | 9.06 in |
Overall Length | 15.13 in |
Product Type | Centrifugal Pump |
Impeller Design | Closed |
Nameplate Voltage | 208-230/460V AC |
Duty Cycle | Continuous |
Horsepower (Maximum) | 1 1/2 hp |
Media Temperature (Minimum) | 40 Degrees F |
Ambient Temperature (Minimum) | 40 Degrees F |
Specific Gravity (Maximum) | 1 |
Discharge Pipe Size | 1 1/4 in |
Intake Pipe Size | 1 1/2 in |
Wetted Material | Carbon, Ceramic, Stainless Steel, Viton |
Flow Rate @ 70 ft of Head (Maximum) | 3 gpm |
Intake Pipe Type | NPT |
Priming | Manual |
Motor Speed (Maximum) | 3,450 RPM |
Shaft Outer Diameter | 7/16 in |
Media Temperature (Maximum) | 250 Degrees F |
Suction Port | 1 1/2 in NPT |
Flow Rate @ 60 ft of Head (Maximum) | 21 gpm |
Ambient Temperature (Maximum) | 140 Degrees F |
Flow Rate @ 25 ft of Head (Maximum) | 82 gpm |
Current | 4.09 to 3.72 or 1.86 A |
Flow Rate @ 20 ft of Head (Maximum) | 88 gpm |
Discharge Port | 1 1/4 in NPT |
Compatible Motor Frame | 143TC |
Best Efficiency Flow | 42 gpm |
Flow Rate @ 30 ft of Head (Maximum) | 78 gpm |
Flow Rate @ 50 ft of Head (Maximum) | 42 gpm |
Best Efficiency Head | 50 ft |
Frequency | 60 Hz |
For Use With Potable Systems | No |
Flow Rate @ 40 ft of Head (Maximum) | 61 gpm |
Viscosity (Maximum) | 264 cps |
Temperature Code | T3C |
Motor Thermal Protection | None |
Discharge Pipe Type | NPT |
Solid Diameter (Maximum) | 1/6 in |
Feet of Head (Maximum) | 72 ft |
Case Pressure (Maximum) | 150 psi |
Discharge Rotation | 90 Degrees Increments |
Country of Origin (subject to change) | China |
Package Quantity | 1 |
Haz Location CentPump, 1 1/2 HP, DAYTON, Mfr# 5WXU8
$2949,99
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 1 1/4 in, Discharge Pipe Type NPT, Discharge Rotation 90 Degrees Increments, Feet of Head (Maximum) 72 ft, Flow Rate @ 20 ft of Head (Maximum) 88 gpm, Flow Rate @ 40 ft of Head (Maximum) 61 gpm, For Use With Potable Systems No, Hazardous Location Class Class I Division 1 Groups C, D, Class II Division 2 Groups E, F, G, Horsepower (Maximum) 1 1/2 hp, Housing Material 316 Stainless Steel, Impeller Design Closed, Impeller Material Stainless Steel
0 in stock
Must order in multiples of 1
Subtotal:
$2949.99
You must be logged in to post a review.
Reviews
There are no reviews yet.