| Item - Jaw Coupling Hubs | Curved Jaw Coupling Hub |
| Size - Jaw Couplings | MJC41 |
| Bore Dia. | 10 mm |
| Keyway Size Type | None |
| Material - Hubs | Aluminum |
| Outside Dia. | 1.63 in |
| Assembled Coupling Length | 53 mm |
| Keyway Size | None |
| Overall Length | 53 mm |
| Size | MJC41 |
| Material | Aluminum |
| Item | Jaw Coupling Hub |
| Coupling Size | MJC41 |
| Hub Material | Aluminum |
| Zero Backlash | Yes |
| Full Bearing Support Required | Yes |
| Fail Safe | Yes |
| Shaft Locking Type | Clamp On |
| System of Measurement | Metric |
| Hub Diameter | 41.3 mm |
| Jaw Profile | Curved |
| Weight | 0.2 lb |
| Maximum Speed | 8,000 RPM |
| Hub Projection | 18 mm |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015, REACH Compliant, RoHS3 Compliant |
| Bore Type | Round Bore |
| Bore Tolerance | +0.05/-0.00 mm |
| Screw Material Finish | Black Oxide |
| Hub Material Finish | Bright |
| Minimum Operating Temperature | -23 Degrees C |
| Hub Material Grade | 2024-T351 |
| Outside Diameter | 41.3 mm |
| Keyway Width | Not Applicable |
| Keyway Depth | Not Applicable |
| Length through Bore | 18 mm |
| Screw Material | Alloy Steel |
| Included Screws | Hex Socket Cap Screw |
| Coupling Overall Length | 53 mm |
| Screw Thread Size | M4 |
| Shaft Tolerance | +0.000/-0.013 mm |
| Maximum Operating Temperature | 82 Degrees C |
| Recommended Hub Gap | 1.3 mm |
| Number of Locking Screws | 1 |
| Bore Diameter | 10 mm |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Jaw Cplg Hub, Bore Dia 10 mm, Size MJC41, RULAND, Mfr# MJC41-10-A
$36,99
Free shipping will be applied on orders over $50
Jaw Coupling Hub, Coupling Size MJC41, Outside Diameter 41.3 mm, Coupling Overall Length 53 mm, System of Measurement Metric, Hub Material Aluminum, Maximum Speed 8,000 RPM, Keyway Depth Not Applicable, Keyway Width Not Applicable, Bore Diameter 10 mm, Shaft Locking Type Clamp On, Bore Type Round Bore, Jaw Profile Curved, Screw Thread Size M4, Bore Tolerance +0.05/-0.00 mm, Fail Safe Yes, Shaft Tolerance +0.000/-0.013 mm, Full Bearing Support Required Yes, Hub Diameter 41.3 mm
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.