| Item - Jaw Coupling Hubs | Curved Jaw Coupling Hub |
| Size - Jaw Couplings | MJCC25 |
| Bore Dia. | 12 mm |
| Keyway Size Type | 4mm x 1.8mm |
| Material - Hubs | Aluminum |
| Outside Dia. | 1 in |
| Assembled Coupling Length | 35.4 mm |
| Material | Aluminum |
| Size | MJCC25 |
| Overall Length | 35.4 mm |
| Item | Jaw Coupling Hub |
| Keyway Size | 4mm x 1.8mm |
| Coupling Size | MJC25 |
| Zero Backlash | Yes |
| Hub Projection | 11.9 mm |
| Keyway Depth | 1.8 mm |
| Screw Material Finish | Black Oxide |
| Screw Thread Size | M3 |
| Bore Diameter | 12 mm |
| Length through Bore | 11.9 mm |
| Bore Tolerance | +0.05/-0.00 mm |
| Recommended Hub Gap | 0.8 mm |
| Hub Material Grade | 2024-T351 |
| Keyway Width | 4 mm |
| System of Measurement | Metric |
| Hub Diameter | 25.4 mm |
| Shaft Locking Type | Clamp On |
| Outside Diameter | 25.4 mm |
| Standards | Conflict Minerals Compliant, DIN 912 12.9, ISO 9001:2015, REACH Compliant, RoHS3 Compliant |
| Included Screws | Hex Socket Cap Screw |
| Weight | 0 lb |
| Screw Material | Alloy Steel |
| Coupling Overall Length | 35.3 mm |
| Minimum Operating Temperature | -23 Degrees C |
| Number of Locking Screws | 1 |
| Bore Type | Round Bore with Keyway |
| Shaft Tolerance | +0.000/-0.013 mm |
| Full Bearing Support Required | Yes |
| Maximum Speed | 8,000 RPM |
| Maximum Operating Temperature | 82 Degrees C |
| Hub Material Finish | Bright |
| Jaw Profile | Curved |
| Hub Material | Aluminum |
| Fail Safe | Yes |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Jaw Cplg Hub, Bore Dia 12 mm, Size MJCC25, RULAND, Mfr# MJCC25-12-A
$34.62
Free shipping will be applied on orders over $50
Jaw Coupling Hub, Coupling Size MJC25, Outside Diameter 25.4 mm, Coupling Overall Length 35.3 mm, System of Measurement Metric, Hub Material Aluminum, Maximum Speed 8,000 RPM, Keyway Depth 1.8 mm, Keyway Width 4 mm, Bore Diameter 12 mm, Shaft Locking Type Clamp On, Bore Type Round Bore with Keyway, Jaw Profile Curved, Screw Thread Size M3, Bore Tolerance +0.05/-0.00 mm, Fail Safe Yes, Shaft Tolerance +0.000/-0.013 mm, Full Bearing Support Required Yes, Hub Diameter 25.4 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$34.62
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.