HP Required | 1/2 hp |
Inlet (In.) | 1 1/4 in |
Outlet | 1 in |
Wetted Materials | Brass, Bronze, Buna-N, Carbon, Ceramic, Stainless Steel |
Best Efficiency GPM @ Head | 38 @ 27 ft |
Bearing Type | Ball |
Inlet Pressure | 200 psi |
Seal Material | Buna-N |
GPM of Water @ 10 Ft. of Head | 67 |
Housing Material | Bronze |
Includes | Mounting Base, Manual, No Motor or Drive Couplers |
GPM of Water @ 40 Ft. of Head | 10 |
Inlet | 1-1/4 in |
Impeller Type | Semi Open |
Max. Case Pressure | 200 psi |
Duty | Continuous |
Manufacturers Warranty Length | 1 yr |
Item | Pedestal Pump |
Max. Specific Gravity | 1.0 |
Length | 6 5/8 in |
Port Rotation | 4 Position |
Width | 6 5/8 in |
Height | 6 7/8 in |
Max. Pressure | 19 psi |
GPM of Water @ 20 Ft. of Head | 57 |
GPM of Water @ 30 Ft. of Head | 40 |
GPM of Water @ 15 Ft. of Head | 62 |
Impeller Material | Bronze |
For Use With | Nonflammable and Nonabrasive Liquids |
Overall Length | 6.63 in |
Overall Width | 6.63 in |
Overall Height | 6.88 in |
Discharge Type | NPT |
Maximum Flow Rate | 67 gpm |
Intake Type | NPT |
Shaft Material | 304 Stainless Steel |
Minimum Media Temperature | 40 Degrees F |
Feet of Head (Minimum) | 10 ft |
Sized for Horsepower | 1/2 hp |
Wetted Material | Brass, Bronze, Buna-N, Carbon, Ceramic, Stainless Steel |
Minimum Flow Rate | 10 gpm |
Flow Rate @ 40 ft of Head (Maximum) | 10 gpm |
Best Efficiency Head | 27 ft |
Flow Rate @ 20 ft of Head (Maximum) | 57 gpm |
Priming | Manual |
Flow Rate @ 100 ft of Head (Maximum) | Not Applicable |
Pump Housing Material | Bronze |
Compatible Intake Pipe Size | 1 1/4 in |
Compatible with Media Type | Non-Abrasive Liquids, Non-Flammable Liquids |
Flow Rate @ 5 ft of Head (Maximum) | Not Applicable |
NPSHr | 200 psi |
Flow Rate @ 60 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 70 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 10 ft of Head (Maximum) | 67 gpm |
Phase | Three |
System Pressure (Maximum) | 19 psi |
Flow Rate @ 15 ft of Head (Maximum) | 62 gpm |
Suction Lift (Maximum) | Not Applicable |
Compatible Discharge Pipe Size | 1 in |
Maximum Media Temperature | 200 Degrees F |
Duty Cycle | Continuous |
Maximum Feet of Head | 44 ft |
Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 90 ft of Head (Maximum) | Not Applicable |
Specific Gravity (Maximum) | 1 |
Shaft Outside Diameter | 5/8 in |
Intake and Discharge Size | 1 1/4 in , 1 in |
Best Efficiency Flow | 38 gpm |
Flow Rate @ 50 ft of Head (Maximum) | Not Applicable |
Seal Type | Mechanical |
Manufacturer Warranty Length | 1 yr |
Pumping Application | Aggressive Liquid Applications, Boiler Feed, Boosters, Chemical Processing, Condensate Return, Cooling Towers, Filtration, Fountains, General Purpose Pumping, General Transfer, Irrigation, Jockey Pump Service, Marine Applications, Spraying Systems, Transfer of Liquids, Utility, Water Circulation |
Flow Rate @ 1 ft of Head (Maximum) | Not Applicable |
For Use With Potable Systems | No |
Flow Rate @ 30 ft of Head (Maximum) | 40 gpm |
Impeller Design | Semi-Open |
Country of Origin (subject to change) | India |
Package Quantity | 1 |
Pedestal Pump, Centrifugal, HP Req. 1/2, DAYTON, Mfr# 2ZWY2
$169,99
Free shipping will be applied on orders over $50
Pedestal Pump, Pump Housing Material Bronze, Sized for Horsepower 1/2 hp, Flow Rate @ 10 ft of Head (Maximum) 67 gpm, Flow Rate @ 20 ft of Head (Maximum) 57 gpm, Flow Rate @ 30 ft of Head (Maximum) 40 gpm, Flow Rate @ 40 ft of Head (Maximum) 10 gpm, Maximum Feet of Head 44 ft, Discharge Type NPT, Intake Type NPT, Compatible Intake Pipe Size 1 1/4 in, Compatible Discharge Pipe Size 1 in, Shaft Outside Diameter 5/8 in, Priming Manual, NPSHr 200 psi, Best Efficiency Flow 38 gpm
Out of stock
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.