Item | Chemical Resistant Centrifugal Pump |
HP | 1 1/2 hp |
Housing Material | 304 Stainless Steel |
Phase | Single |
Voltage | 115/230 |
Max. GPM @ Head | 116 gpm @ 5 ft |
Max. Head | 65 ft |
Best Efficiency GPM @ Head | 50 gpm @ 48 ft |
Inlet | 1-1/2 in NPT |
Outlet | 1-1/4 in NPT |
Motor Enclosure | Totally Enclosed Fan Cooled |
GPM of Water @ 20 Ft. of Head | 100 |
Height | 7 7/8 in |
Length | 14 3/8 in |
Amps | 15.0/7.5 |
Motor Type | Permanent Split Capacitor |
GPM of Water @ 15 Ft. of Head | 105 |
Max. Fluid Viscosity | 31 SUS |
GPM of Water @ 60 Ft. of Head | 13 |
Agency Compliance | CUS |
GPM of Water @ 40 Ft. of Head | 70 |
Port Rotation | 90 Degrees Increments |
Max. Liquid Temp. | 200 Degrees F |
Seal Type | Mechanical |
GPM of Water @ 5 Ft. of Head | 116 |
Max. Case Pressure | 150 psi |
Motor RPM | 3,450 RPM |
Seal Material | Carbon, Ceramic, Stainless Steel, Viton |
Max. Dia. Solids | 1/8 in |
Best Efficiency Range GPM @ Head | 16 to 97 gpm @ 60 to 23 ft |
Min. GPM @ Head | 13 gpm @ 60 ft |
Drain Plug | No |
Service Factor | 1.15 |
Includes | Manual |
GPM of Water @ 30 Ft. of Head | 81 |
NEMA/IEC Frame | 56J |
Max. Specific Gravity | 1.0 |
GPM of Water @ 25 Ft. of Head | 95 |
Duty | Continuous |
Impeller Type | Closed |
Hz | 60 |
Shaft Material | Stainless Steel |
GPM of Water @ 50 Ft. of Head | 44 |
Manufacturers Warranty Length | 1 yr |
Wetted Materials | 304 Stainless Steel, Carbon, Ceramic, Viton |
Screw Material | Stainless Steel |
Impeller Material | 304 Stainless Steel |
Inlet Pressure | 121 psi |
GPM of Water @ 10 Ft. of Head | 108 |
Bearing Type | Ball |
Application | Chemical Processing, Circulation, Cooling, Liquids Transfer, Pressure Boosting and Circulating |
Width | 9 1/4 in |
Volute Material | 304 Stainless Steel |
Standards | CUS |
Overall Width | 9.3 in |
Overall Length | 14.4 in |
Overall Height | 7.9 in |
Discharge Rotation | 90 Degrees Increments |
Cord Length | Not Applicable |
Specific Gravity (Maximum) | 1 |
Flow Rate @ 30 ft of Head (Maximum) | 76 gpm |
Horsepower (Maximum) | 1 1/2 hp |
Flow Rate (Maximum) | 116 gpm |
Solid Diameter (Maximum) | 0.13 in |
Media Temperature (Minimum) | 40 Degrees F |
Viscosity (Maximum) | 31 SUS |
For Use With Potable Systems | No |
Suction Port | 1 1/2 in NPT |
Flow Rate @ 25 ft of Head (Maximum) | 85 gpm |
Case Pressure (Maximum) | 150 psi |
Electrical Connection Type | Not Applicable |
Flow Rate @ 70 ft of Head (Maximum) | Not Applicable |
Flow Rate @ 20 ft of Head (Maximum) | 95 gpm |
Flow Rate @ 60 ft of Head (Maximum) | 13 gpm |
Compatible Motor Frame | 56J NEMA |
Priming | Manual |
Best Efficiency Flow | 50 gpm |
Discharge Port | 1 1/4 in NPT |
Intake Pipe Size | 1 1/2 in |
Flow Rate (Minimum) | 13 gpm |
Flow Rate @ 40 ft of Head (Maximum) | 60 gpm |
Ambient Temperature (Maximum) | 104 Degrees F |
Shut Off Pressure (Maximum) | 150 psi |
Wetted Material | 304 Stainless Steel, Carbon, Ceramic, Viton |
Discharge Pipe Type | NPT |
Flow Rate @ 15 ft of Head (Maximum) | 98 gpm |
Flow Rate @ 5 ft of Head (Maximum) | 102 gpm |
Feet of Head (Maximum) | 78 ft |
Discharge Pipe Size | 1 1/4 in |
Flow Rate @ 10 ft of Head (Maximum) | 100 gpm |
Nameplate Voltage | 115/230V AC |
Flow Rate @ 1 ft of Head (Maximum) | 103 gpm |
Frequency | 60 Hz |
Best Efficiency Head | 48 ft |
Motor Speed (Maximum) | 3,450 RPM |
Shaft Outer Diameter | 7/16 in |
Duty Cycle | Continuous |
Ambient Temperature (Minimum) | 40 Degrees F |
Impeller Design | Closed |
Intake Pipe Type | NPT |
Media Temperature (Maximum) | 200 Degrees F |
Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
Current | 15.0 or 7.5 A |
Country of Origin (subject to change) | China |
Package Quantity | 1 |
Pump, 1 1/2 HP, 115/230V, 15.0/7.5Amp, DAYTON, Mfr# 4JMX4
-$292.08 / ea
with subscription
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 1 1/4 in, Discharge Pipe Type NPT, Feet of Head (Maximum) 78 ft, Flow Rate (Maximum) 116 gpm, Horsepower (Maximum) 1 1/2 hp, Housing Material 304 Stainless Steel, Impeller Design Closed, Impeller Material 304 Stainless Steel, Intake Pipe Size 1 1/2 in, Intake Pipe Type NPT, Media Temperature (Maximum) 200 Degrees F, Phase Single, Shut Off Pressure (Maximum) 150 psi, Viscosity (Maximum) 31 SUS, Flow Rate @ 10 ft of Head (Maximum) 100 gpm
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.