HP | 3 hp |
Item | Chemical Resistant Centrifugal Pump |
Housing Material | 316 Stainless Steel |
Phase | Three |
Voltage | 208-230/460 |
Max. GPM @ Head | 150 gpm @ 5 ft |
Max. Head | 81 ft |
Best Efficiency GPM @ Head | 90 gpm @ 48 ft |
Inlet | 2 in NPT |
Outlet | 1-1/2 in NPT |
Motor Enclosure | Totally Enclosed Fan Cooled |
GPM of Water @ 60 Ft. of Head | 62 |
Max. Liquid Temp. | 300 Degrees F |
Impeller Material | 316 Stainless Steel |
Inlet Pressure | 115 psi |
GPM of Water @ 10 Ft. of Head | 144 |
Drain Plug | No |
Port Rotation | 90 Degrees Increments |
GPM of Water @ 20 Ft. of Head | 131 |
Max. Case Pressure | 150 psi |
GPM of Water @ 70 Ft. of Head | 38 |
GPM of Water @ 40 Ft. of Head | 105 |
Max. Dia. Solids | 1/8 in |
GPM of Water @ 25 Ft. of Head | 126 |
Application | Chemical Processing, Circulating, Cooling, Liquid Transfer, Pressure Boosting, Recirculation |
Manufacturers Warranty Length | 1 yr |
Impeller Type | Closed |
GPM of Water @ 15 Ft. of Head | 138 |
Height | 7 3/4 in |
Length | 15 3/8 in |
Width | 10 1/2 in |
Duty | Continuous |
GPM of Water @ 80 Ft. of Head | 5 |
Includes | Manual |
GPM of Water @ 30 Ft. of Head | 116 |
Max. Fluid Viscosity | 260 SUS |
NEMA/IEC Frame | 56J |
Motor RPM | 3,450 RPM |
Amps | 11.5-10.8/5.4 |
Min. GPM @ Head | 38 gpm @ 70 ft |
Hz | 60 |
Bearing Type | Ball |
Agency Compliance | CUS |
Wetted Materials | 316 Stainless Steel, Carbon, Ceramic, Viton |
Shaft Material | Stainless Steel |
Seal Type | Mechanical |
Seal Material | Carbon, Ceramic, Stainless Steel, Viton |
GPM of Water @ 5 Ft. of Head | 150 |
GPM of Water @ 50 Ft. of Head | 85 |
Best Efficiency Range GPM @ Head | 110 to 40 gpm @ 28 to 65 ft |
Max. Specific Gravity | 1.0 |
Service Factor | 1.15 |
Screw Material | Stainless Steel |
Volute Material | 316 Stainless Steel |
Motor Type | Three-Phase Induction |
Overall Length | 15.4 in |
Overall Height | 7.8 in |
Standards | CUS |
Overall Width | 10.5 in |
Solid Diameter (Maximum) | 0.13 in |
Priming | Manual |
For Use With Potable Systems | No |
Impeller Design | Closed |
Flow Rate (Maximum) | 150 gpm |
Flow Rate @ 5 ft of Head (Maximum) | 150 gpm |
Intake Pipe Size | 2 in |
Horsepower (Maximum) | 3 hp |
Flow Rate @ 20 ft of Head (Maximum) | 131 gpm |
Viscosity (Maximum) | 260 SUS |
Discharge Port | 1 1/2 in NPT |
Ambient Temperature (Maximum) | 104 Degrees F |
Flow Rate @ 15 ft of Head (Maximum) | 138 gpm |
Best Efficiency Flow | 90 gpm |
Flow Rate @ 30 ft of Head (Maximum) | 116 gpm |
Discharge Pipe Type | NPT |
Compatible Motor Frame | 56J NEMA |
Feet of Head (Maximum) | 81 ft |
Flow Rate @ 10 ft of Head (Maximum) | 144 gpm |
Shut Off Pressure (Maximum) | 150 psi |
Duty Cycle | Continuous |
Case Pressure (Maximum) | 150 psi |
Electrical Connection Type | Not Applicable |
Nameplate Voltage | 208-230/460V AC |
Intake Pipe Type | NPT |
Discharge Rotation | 90 Degrees Increments |
Flow Rate @ 1 ft of Head (Maximum) | 152 gpm |
Flow Rate @ 60 ft of Head (Maximum) | 62 gpm |
Flow Rate @ 40 ft of Head (Maximum) | 105 gpm |
Frequency | 60 Hz |
Motor Speed (Maximum) | 3,450 RPM |
Media Temperature (Minimum) | 40 Degrees F |
Shaft Outer Diameter | 7/16 in |
Wetted Material | 316 Stainless Steel, Carbon, Ceramic, Viton |
Media Temperature (Maximum) | 300 Degrees F |
Flow Rate @ 25 ft of Head (Maximum) | 126 gpm |
Flow Rate @ 80 ft of Head (Maximum) | 3 gpm |
Discharge Pipe Size | 1 1/2 in |
Cord Length | Not Applicable |
Flow Rate (Minimum) | 38 gpm |
Best Efficiency Head | 48 ft |
Ambient Temperature (Minimum) | 40 Degrees F |
Suction Port | 2 in NPT |
Flow Rate @ 70 ft of Head (Maximum) | 25 gpm |
Specific Gravity (Maximum) | 1 |
Current | 6.6 or 3.3 A |
Country of Origin (subject to change) | China |
Package Quantity | 1 |
Pump, Centrifugal, SS, 3 HP, 3 PH, DAYTON, Mfr# 5WXU1
$1385,99
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 1 1/2 in, Discharge Pipe Type NPT, Feet of Head (Maximum) 81 ft, Flow Rate (Maximum) 150 gpm, Horsepower (Maximum) 3 hp, Housing Material 316 Stainless Steel, Impeller Design Closed, Impeller Material 316 Stainless Steel, Intake Pipe Size 2 in, Intake Pipe Type NPT, Media Temperature (Maximum) 300 Degrees F, Phase Three, Shut Off Pressure (Maximum) 150 psi, Viscosity (Maximum) 260 SUS, Flow Rate @ 10 ft of Head (Maximum) 144 gpm
0 in stock
Must order in multiples of 1
Subtotal:
$1385.99
You must be logged in to post a review.
Reviews
There are no reviews yet.