| Item | Submersible Pump Motor |
| Phase | Single |
| HP | 3/4 |
| Voltage | 230V AC |
| Number of Wires | 3 |
| RPM Range | 1,725-3,450 |
| Motor Service Factor | 1.15 |
| Motor Bearings | Kingsbury |
| Nameplate RPM | 3,450 |
| Motor Sub Application | Water Wells |
| Max. SF Amps | 8 |
| Shaft Material | Nitrile Rubber |
| Full Load Amps | 6.8 |
| Max. Ambient Temp. | 86 Degrees F |
| Motor Design | Capacitor-Start/Run |
| Motor Enclosure Design | Hermetically Sealed |
| Motor Thermal Protection | Built-In Lightning Arrestor |
| Hz | 60 Hz |
| Overload Relay Max. Amp Setting | 8 A |
| Motor Application | Pumps |
| Overload Relay Required | No |
| Height | 12 1/8 in |
| Overload Relay Amp Setting | 6.8 A |
| Standards | ANSI/NSF 61 |
| Motor Shaft Rotation | CCW |
| Lead Length | 4 ft |
| Starter Required | No |
| Thrust Rating | 300 lb |
| Stator Type | Hermetically Sealed |
| Diaphragm Type | Pressure Equalizing |
| Motor Shaft Design | Splined |
| Duty Cycle | Continuous |
| Manufacturers Warranty Length | 1 yr |
| Motor Mounting Position | Vertical Shaft Up |
| Part Winding Start Capable | No |
| Bearing Protection | Not Applicable |
| Motor Mounting Type | NEMA Pump Mounting |
| Shaft Dia. | 5/8 in |
| Weight | 21 lb |
| Inverter Rated | No |
| Resilient Ring Dia. | Not Applicable |
| Bolt Circle Dia. | 2 7/8 in |
| Body Dia. | 3.8 in |
| Length Less Shaft | 10 5/8 in |
| Frame | Not Applicable |
| CC Number | Not Applicable |
| Conduit Box Location | Not Applicable |
| Shaft Length | 11 1/4 in |
| Nominal Efficiency | 60 % |
| Inverter Rating | Not Applicable |
| Regreasable Bearings | Not Applicable |
| Ring to Ring Center | Not Applicable |
| Includes | Not Applicable |
| Conduit Box Position | Not Applicable |
| Ins. Class | B |
| Motor Frame Material | Stainless Steel |
| No. of Speeds | Not Applicable |
| Finish | Not Applicable |
| NEMA Design | Not Applicable |
| Overall Length | 10 5/8 in |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |
Pump Motor, 6.8A Full Load, 11-1/4"Shaft L, LITTLE GIANT PUMP, Mfr# 2145079004GS
$582,99
Free shipping will be applied on orders over $50
Submersible Pump Motor, Bearing Protection Not Applicable, Body Dia. 3.8 in, Bolt Circle Dia. 2 7/8 in, CC Number Not Applicable, Conduit Box Location Not Applicable, Conduit Box Position Not Applicable, Diaphragm Type Pressure Equalizing, Duty Cycle Continuous, Finish Not Applicable, Frame Not Applicable, Hz 60 Hz, Full Load Amps 6.8, Height 12 1/8 in, HP 3/4, Includes Not Applicable, Ins. Class B, Inverter Rated No, Inverter Rating Not Applicable, Lead Length 4 ft, Length Less Shaft 10 5/8 in
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.