| Item | Pump |
| HP | 1/3 hp |
| Motor Enclosure | Not Applicable |
| Inlet/Outlet (In.) | 1/2 NPT |
| GPM of Water @ 5 Ft. of Head | 5.7 gpm |
| Max. Head (Ft.) | 70 ft |
| Max. Pressure (PSI) | 30.3 psi |
| Width (In.) | 3 3/8 in |
| Self-Priming | Yes |
| GPM of Water @ 10 Ft. of Head | 5.5 gpm |
| Min. Start Torque (In.-Lbs.) | 30 in-lb |
| Characteristics | Pumps are Bi-Directional |
| GPM of Water @ 40 Ft. of Head | 4.6 gpm |
| GPM of Water @ 50 Ft. of Head | 4.3 gpm |
| GPM of Water @ 60 Ft. of Head | 4.1 gpm |
| GPM of Water @ 20 Ft. of Head | 5 gpm |
| Max. Liquid Temp. (F) | 180 Degrees F |
| Seals | Carbon, Ceramic |
| Includes | Manual |
| Bearings | Carbon Graphite |
| Height (In.) | 3 1/16 in |
| Body Material | Bronze and Brass |
| Motor Type | Not Applicable |
| Size Height O.C. (In.) | 1 5/8 in |
| Max. Suction Lift (Ft.) | 8.1 ft |
| Mounting Holes O.C. (In.) | 2 1/8 in |
| Pumps Up To (Ft.) | 70 ft |
| Max. SSU @ 1725 RPM | 5,000 SUS |
| RPM | 1,750 RPM |
| Application | Pumps are used in a wide range of commercial, industrial, and agricultural applications where non-abrasive fluids compatible with the pump component materials are being used. |
| Impeller | Nitrile |
| GPM of Water @ 30 Ft. of Head @ 1725 RPM | 4.8 gpm |
| Shaft Dia. (In.) | 1/2 in |
| GPM of Water @ 10 Ft. of Head @ 1725 RPM | 5.5 gpm |
| Type | Pump Head, Close Coupled |
| GPM of Water @ 30 Ft. of Head | 4.8 gpm |
| Length (In.) | 5 5/8 in |
| Shaft Material | Stainless Steel |
| Impeller Material | Buna-N |
| Cord Length | Not Applicable |
| Housing Material | Brass |
| Overall Height | 3.1 in |
| Overall Length | 5.6 in |
| Overall Width | 3.4 in |
| Flow Rate @ 30 ft of Head - Maximum | 4.8 gpm |
| Flow Rate @ 10 ft of Head - Maximum | 5.5 gpm |
| Bearing Type | Ball, Sleeve |
| Flow Rate - Maximum | 5.9 gpm |
| Suction Lift - Maximum | 8.1 ft |
| Seal Type | Mechanical |
| Bearing Material | Carbon Graphite |
| Priming | Self-Priming |
| Nameplate Voltage | Not Applicable |
| Impeller Diameter | 56 1/2 mm |
| Flow Rate @ 5 ft of Head - Maximum | 5.7 gpm |
| Discharge Connection Size | 1/2 in |
| Feet of Head - Maximum | 70 ft of head |
| Shaft Outer Diameter | 1/2 in |
| Media Temperature - Maximum | 180 Degrees F |
| Seal Material | Carbon, Ceramic |
| Flow Rate @ 40 ft of Head - Maximum | 4.6 gpm |
| Flow Rate - Minimum | 0 gpm |
| Current | Not Applicable |
| Media Intake Connection Type | NPT |
| Motor Speed - Maximum | 1,750 RPM |
| Operating Pressure - Maximum | 30.3 psi |
| Motor Thermal Protection | Not Applicable |
| Media Intake Connection Size | 1/2 in |
| Flow Rate @ 1 ft of Head - Maximum | 5.8 gpm |
| Flow Rate @ 20 ft of Head - Maximum | 5 gpm |
| Wetted Material | Brass, Neoprene, Stainless Steel |
| Duty Cycle | Intermittent |
| Discharge Connection Type | NPT |
| Motor Mounting Type | Close Coupled |
| Viscosity - Maximum | 5,000 SUS |
| Horsepower - Maximum | 3/8 hp |
| Required Horsepower | 1/3 hp |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Pump, Pedestal, Inlet/Outlet 1/2 In., DAYTON, Mfr# 3ACA9
$378,99
-$11.37 / ea
with subscription
Free shipping will be applied on orders over $50
Pump, Discharge Connection Size 1/2 in, Discharge Connection Type NPT, Feet of Head - Maximum 70 ft of head, Flow Rate - Maximum 5.9 gpm, Housing Material Brass, Impeller Material Buna-N, Media Intake Connection Size 1/2 in, Media Intake Connection Type NPT, Priming Self-Priming, Required Horsepower 1/3 hp, Shaft Material Stainless Steel, Shaft Outer Diameter 1/2 in, Viscosity - Maximum 5,000 SUS, Motor Mounting Type Close Coupled, Operating Pressure - Maximum 30.3 psi
9999 in stock
Must order in multiples of 1
Subtotal:
$378.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.