Item | Pump |
HP | 3/4 hp |
Motor Enclosure | Not Applicable |
Inlet/Outlet (In.) | 3/4 NPT |
GPM of Water @ 5 Ft. of Head | 11.7 gpm |
Max. Head (Ft.) | 80 ft |
Max. Pressure (PSI) | 34.6 psi |
Impeller | Nitrile |
GPM of Water @ 60 Ft. of Head | 7.8 gpm |
Seals | Carbon, Ceramic |
Min. Start Torque (In.-Lbs.) | 45 in-lb |
Self-Priming | Yes |
Max. SSU @ 1725 RPM | 5,000 SUS |
Body Material | Bronze and Brass |
Type | Pump Head, Close Coupled |
Shaft Dia. (In.) | 5/8 in |
Length (In.) | 5 29/32 in |
GPM of Water @ 20 Ft. of Head | 11 gpm |
RPM | 1,750 RPM |
GPM of Water @ 30 Ft. of Head | 10.6 gpm |
GPM of Water @ 10 Ft. of Head | 11.5 gpm |
GPM of Water @ 30 Ft. of Head @ 1725 RPM | 10.6 gpm |
Height (In.) | 3 3/4 in |
Size Height O.C. (In.) | 2 1/8 in |
Max. Suction Lift (Ft.) | 9.4 ft |
Pumps Up To (Ft.) | 80 ft |
Max. Liquid Temp. (F) | 180 Degrees F |
Characteristics | Pumps are Bi-Directional |
GPM of Water @ 10 Ft. of Head @ 1725 RPM | 11.5 gpm |
Motor Type | Not Applicable |
Width (In.) | 3 7/8 in |
GPM of Water @ 50 Ft. of Head | 9 gpm |
GPM of Water @ 40 Ft. of Head | 10.1 gpm |
Mounting Holes O.C. (In.) | 2 1/4 in |
Bearings | Carbon Graphite |
Includes | Manual |
Shaft Material | Stainless Steel |
Application | Pumps are used in a wide range of commercial, industrial, and agricultural applications where non-abrasive fluids compatible with the pump component materials are being used. |
Cord Length | Not Applicable |
Housing Material | Brass |
Impeller Material | Buna-N |
Overall Height | 3.8 in |
Overall Width | 3.9 in |
Overall Length | 6 in |
Flow Rate @ 10 ft of Head - Maximum | 11.5 gpm |
Flow Rate @ 5 ft of Head - Maximum | 11.7 gpm |
Feet of Head - Maximum | 80 ft of head |
Flow Rate - Maximum | 11.9 gpm |
Media Temperature - Maximum | 180 Degrees F |
Motor Mounting Type | Close Coupled |
Flow Rate - Minimum | 0 gpm |
Motor Speed - Maximum | 1,750 RPM |
Seal Type | Mechanical |
Motor Thermal Protection | Not Applicable |
Priming | Self-Priming |
Operating Pressure - Maximum | 34.6 psi |
Horsepower - Maximum | 3/4 hp |
Flow Rate @ 20 ft of Head - Maximum | 11 gpm |
Current | Not Applicable |
Flow Rate @ 40 ft of Head - Maximum | 10.1 gpm |
Shaft Outer Diameter | 5/8 in |
Impeller Diameter | 62 1/5 mm |
Bearing Material | Carbon Graphite |
Discharge Connection Size | 3/4 in |
Required Horsepower | 3/4 hp |
Flow Rate @ 30 ft of Head - Maximum | 10.6 gpm |
Viscosity - Maximum | 5,000 SUS |
Wetted Material | Brass, Neoprene, Stainless Steel |
Discharge Connection Type | NPT |
Seal Material | Carbon, Ceramic |
Nameplate Voltage | Not Applicable |
Duty Cycle | Intermittent |
Suction Lift - Maximum | 9.4 ft |
Media Intake Connection Size | 3/4 in |
Media Intake Connection Type | NPT |
Flow Rate @ 1 ft of Head - Maximum | 11.85 gpm |
Bearing Type | Ball, Sleeve |
Country of Origin (subject to change) | China |
Package Quantity | 1 |
Pump, Pedestal, Inlet/Outlet 3/4 In., DAYTON, Mfr# 3ACB1
$412,99
-$12.39 / ea
with subscription
Free shipping will be applied on orders over $50
Pump, Discharge Connection Size 3/4 in, Discharge Connection Type NPT, Feet of Head - Maximum 80 ft of head, Flow Rate - Maximum 11.9 gpm, Housing Material Brass, Impeller Material Buna-N, Media Intake Connection Size 3/4 in, Media Intake Connection Type NPT, Priming Self-Priming, Required Horsepower 3/4 hp, Shaft Material Stainless Steel, Shaft Outer Diameter 5/8 in, Viscosity - Maximum 5,000 SUS, Motor Mounting Type Close Coupled, Operating Pressure - Maximum 34.6 psi
9999 in stock
Must order in multiples of 1
Subtotal:
$412.99
You must be logged in to post a review.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Reviews
There are no reviews yet.