Item | Pump |
HP | 1/3 hp |
Voltage | 115/230 |
Amps | 9.4/4.7 |
Motor Enclosure | Open Dripproof |
NEMA Motor Frame | 56YZ |
Inlet/Outlet (In.) | 1/2 NPT x 3/4 GHT |
Max. Head (Ft.) | 76 ft |
Max. Pressure (PSI) | 32.9 psi |
Application | Pumps are used in a wide range of commercial, industrial, and agricultural applications where non-abrasive fluids compatible with the pump component materials are being used. |
Height (In.) | 12 in |
Self-Priming | Yes |
Shaft Material | Stainless Steel |
Characteristics | Positive Displacement Pumping Action Without Metal-to-Metal Contact. |
Width (In.) | 6 45/64 in |
Impeller Material | Buna-N |
Prime in Feet | 10 Feet and 15 Feet with Foot Valve and Pumps Flooded |
Suction Lift (Ft.) | 10 |
Max. Viscosity | 5,000 SUS |
Temp. Range (F) | 0 to 180 |
Includes | Carrying Handle, Manual |
GPM of Water @ 40 Ft. of Head | 5.8 gpm |
Length (In.) | 11 45/64 in |
GPM of Water @ 20 Ft. of Head | 6.7 gpm |
Cord Length | Not Applicable |
Motor Type | ODP |
Max. SSU @ 1725 RPM | 5,000 SUS |
GPM of Water @ 30 Ft. of Head | 6.1 gpm |
GPM of Water @ 60 Ft. of Head | 3.8 gpm |
Housing Material | Stainless Steel |
GPM of Water @ 10 Ft. of Head | 7.1 gpm |
Seal | Nitrile Lip |
Type | Flexible Impeller |
RPM | 1,725 RPM |
Overall Width | 6.5 in |
Overall Height | 10.7 in |
Overall Length | 13.3 in |
Seal Material | Buna-N |
Suction Lift - Maximum | 10 ft |
Flow Rate @ 60 ft of Head - Maximum | 3.8 gpm |
Flow Rate @ 40 ft of Head - Maximum | 5.8 gpm |
Phase | Single |
Horsepower - Maximum | 1/3 hp |
Operating Pressure - Maximum | 32.9 psi |
Feet of Head - Maximum | 76 ft of head |
Flow Rate @ 1 ft of Head - Maximum | 7.4 gpm |
Discharge Connection Size | 3/4 in |
Bearing Material | Stainless Steel |
Impeller Diameter | 2 1/2 in |
Shaft Outer Diameter | 5/8 in |
Motor Speed - Maximum | 1,725 RPM |
Motor Mounting Type | Horizontal |
Compatible Motor Frame | 56YZ |
Frequency | 60 Hz |
Flow Rate @ 10 ft of Head - Maximum | 7.1 gpm |
Priming | Self-Priming |
Media Temperature - Minimum | 40 Degrees F |
Media Intake Connection Type | FNPT |
Media Temperature - Maximum | 185 Degrees F |
Seal Type | Lip |
For Media Type | Hydraulic Fluids, Petroleum Oils, Silicone Grease |
Wetted Material | Buna-N, Stainless Steel |
Nameplate Voltage | 115 to 230V AC |
Bearing Type | Ball |
Current | 5 A |
Flow Rate @ 20 ft of Head - Maximum | 6.7 gpm |
Viscosity - Maximum | 5,000 SUS |
Flow Rate @ 50 ft of Head - Maximum | 4.6 gpm |
Media Intake Connection Size | 1/2 in |
Flow Rate @ 30 ft of Head - Maximum | 6.1 gpm |
Discharge Connection Type | FNPT |
Country of Origin (subject to change) | China |
Package Quantity | 1 |
Pump, SS, 1/3 HP, 115/230V, 9.4/4.7 Amps, DAYTON, Mfr# 3ACC4
$1585,99
Free shipping will be applied on orders over $50
Pump, Housing Material Stainless Steel, Horsepower - Maximum 1/3 hp, Nameplate Voltage 115 to 230V AC, Flow Rate @ 10 ft of Head - Maximum 7.1 gpm, Viscosity - Maximum 5,000 SUS, Feet of Head - Maximum 76 ft of head, Discharge Connection Size 3/4 in, Media Intake Connection Size 1/2 in, Media Intake Connection Type FNPT, Impeller Material Buna-N, Discharge Connection Type FNPT, Cord Length Not Applicable, Priming Self-Priming, Operating Pressure - Maximum 32.9 psi, Suction Lift - Maximum 10 ft
Out of stock
You must be logged in to post a review.
Reviews
There are no reviews yet.