| HP | 3 hp |
| Item | Chemical Resistant Centrifugal Pump |
| Housing Material | 304 Stainless Steel |
| Phase | Three |
| Voltage | 208-230/460 |
| Max. GPM @ Head | 150 gpm @ 5 ft |
| Max. Head | 81 ft |
| Best Efficiency GPM @ Head | 90 gpm @ 48 ft |
| Inlet | 2 in NPT |
| Outlet | 1-1/2 in NPT |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Service Factor | 1.15 |
| Max. Dia. Solids | 1/8 in |
| GPM of Water @ 50 Ft. of Head | 85 |
| Includes | Manual |
| Max. Liquid Temp. | 200 Degrees F |
| Width | 10 1/2 in |
| GPM of Water @ 40 Ft. of Head | 105 |
| Screw Material | Stainless Steel |
| Port Rotation | 90 Degrees Increments |
| GPM of Water @ 15 Ft. of Head | 138 |
| Impeller Material | 304 Stainless Steel |
| GPM of Water @ 25 Ft. of Head | 126 |
| Seal Type | Mechanical |
| Max. Case Pressure | 150 psi |
| GPM of Water @ 60 Ft. of Head | 62 |
| Max. Fluid Viscosity | 31 SUS |
| Bearing Type | Ball |
| Duty | Continuous |
| Hz | 60 |
| Agency Compliance | CUS |
| GPM of Water @ 80 Ft. of Head | 5 |
| GPM of Water @ 30 Ft. of Head | 116 |
| Amps | 11.5-10.8/5.4 |
| GPM of Water @ 20 Ft. of Head | 131 |
| Impeller Type | Closed |
| Best Efficiency Range GPM @ Head | 90 to 110 gpm @ 48 to 28 ft |
| Inlet Pressure | 115 psi |
| Drain Plug | No |
| Min. GPM @ Head | 38 gpm @ 70 ft |
| GPM of Water @ 70 Ft. of Head | 38 |
| Manufacturers Warranty Length | 1 yr |
| NEMA/IEC Frame | 56J |
| Wetted Materials | 304 Stainless Steel, Carbon, Ceramic, Viton |
| Shaft Material | Stainless Steel |
| GPM of Water @ 5 Ft. of Head | 150 |
| Max. Specific Gravity | 1.0 |
| GPM of Water @ 10 Ft. of Head | 144 |
| Application | Chemical Processing, Circulation, Cooling, Liquids Transfer, Pressure Boosting and Circulating |
| Motor RPM | 3,450 RPM |
| Height | 7 3/4 in |
| Length | 15 3/8 in |
| Seal Material | Carbon, Ceramic, Stainless Steel, Viton |
| Volute Material | 304 Stainless Steel |
| Motor Type | Three-Phase Induction |
| Overall Width | 10.5 in |
| Standards | CUS |
| Overall Length | 15.4 in |
| Overall Height | 7.8 in |
| Flow Rate @ 15 ft of Head (Maximum) | 138 gpm |
| Best Efficiency Head | 48 ft |
| Viscosity (Maximum) | 31 SUS |
| Discharge Rotation | 90 Degrees Increments |
| Flow Rate @ 30 ft of Head (Maximum) | 116 gpm |
| Flow Rate @ 1 ft of Head (Maximum) | 152 gpm |
| Media Temperature (Minimum) | 40 Degrees F |
| Suction Port | 2 in NPT |
| Feet of Head (Maximum) | 81 ft |
| Shaft Outer Diameter | 7/16 in |
| Electrical Connection Type | Not Applicable |
| Flow Rate (Minimum) | 38 gpm |
| Discharge Port | 1 1/2 in NPT |
| Solid Diameter (Maximum) | 0.13 in |
| Impeller Design | Closed |
| Current | 6.6 or 3.3 A |
| Shut Off Pressure (Maximum) | 150 psi |
| Specific Gravity (Maximum) | 1 |
| Discharge Pipe Type | NPT |
| Flow Rate @ 40 ft of Head (Maximum) | 105 gpm |
| Ambient Temperature (Minimum) | 40 Degrees F |
| Horsepower (Maximum) | 3 hp |
| Case Pressure (Maximum) | 150 psi |
| Priming | Manual |
| Wetted Material | 304 Stainless Steel, Carbon, Ceramic, Viton |
| Cord Length | Not Applicable |
| Flow Rate @ 70 ft of Head (Maximum) | 25 gpm |
| Media Temperature (Maximum) | 200 Degrees F |
| For Use With Potable Systems | No |
| Discharge Pipe Size | 1 1/2 in |
| Flow Rate @ 10 ft of Head (Maximum) | 144 gpm |
| Best Efficiency Flow | 90 gpm |
| Motor Speed (Maximum) | 3,450 RPM |
| Intake Pipe Type | NPT |
| Ambient Temperature (Maximum) | 104 Degrees F |
| Frequency | 60 Hz |
| Intake Pipe Size | 2 in |
| Compatible Motor Frame | 56J NEMA |
| Flow Rate @ 80 ft of Head (Maximum) | 3 gpm |
| Duty Cycle | Continuous |
| Nameplate Voltage | 208-230/460V AC |
| Flow Rate @ 5 ft of Head (Maximum) | 150 gpm |
| Flow Rate @ 60 ft of Head (Maximum) | 62 gpm |
| Flow Rate @ 25 ft of Head (Maximum) | 126 gpm |
| Flow Rate @ 20 ft of Head (Maximum) | 131 gpm |
| Flow Rate (Maximum) | 150 gpm |
| Country of Origin (subject to change) | China |
| Package Quantity | 1 |
Pump, 3 HP, 208-230/460V, 11.5-10.8/5.4 Amp, DAYTON, Mfr# 4JMX9
$1188,99
-$35.67 / ea
with subscription
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 1 1/2 in, Discharge Pipe Type NPT, Feet of Head (Maximum) 81 ft, Flow Rate (Maximum) 150 gpm, Horsepower (Maximum) 3 hp, Housing Material 304 Stainless Steel, Impeller Design Closed, Impeller Material 304 Stainless Steel, Intake Pipe Size 2 in, Intake Pipe Type NPT, Media Temperature (Maximum) 200 Degrees F, Phase Three, Shut Off Pressure (Maximum) 150 psi, Viscosity (Maximum) 31 SUS, Flow Rate @ 10 ft of Head (Maximum) 144 gpm
Out of stock
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.