HP | 1/25 hp |
Item | Centrifugal Pump |
Housing Material | Aluminum, Noryl |
Phase | Single |
Voltage | 115 |
Max. GPM @ Head | 11.6 gpm @ 1 ft |
Max. Head | 18 7/10 ft |
Inlet | 3/4 in T |
Best Efficiency GPM @ Head | 11.00 gpm @ 2.62 ft |
Outlet | 3/4 in T |
Motor Enclosure | Totally Enclosed Fan Cooled |
Max. Temp. | 140 Degrees F |
Height | 4 7/8 in |
Impeller Material | 316 Stainless Steel, Nylon |
GPM of Water @ 9 Ft. of Head | 8.4 |
Service Factor | 1 |
Max. Case Pressure | 200 psi |
Cord | 4 ft |
Manufacturers Warranty Length | 1 yr |
Amps | 0.56 |
Best Efficiency Range GPM @ Head | 6.60 to 11.60 gpm @ 1 to 13.12 ft |
Motor RPM | 3,100 RPM |
Volute Material | Noryl |
Application | Water Circulation/Liquid transfer |
Max. Pressure | 29 psi |
GPM of Water @ 7 Ft. of Head | 9.25 |
Drain Plug | No |
Motor Type | Spherical |
Impeller Type | Semi Open |
Includes | Power Cord |
Width | 4 5/16 in |
Seal Type | O-Ring |
Max. Fluid Viscosity | 30 cps |
NEMA/IEC Frame | 56 |
Shaft Material | Stainless Steel |
Max. Liquid Temp. | 140 Degrees F |
Max. Dia. Solids | 3/4 in |
GPM of Water @ 10 Ft. of Head | 8 |
Wetted Materials | 316 Stainless Steel, CarboN/Allumina Ceramic, EPDM, Noryl, Viton |
Length | 6 in |
GPM of Water @ 5 Ft. of Head | 10 |
GPM of Water @ 3 Ft. of Head | 10.75 |
Port Rotation | CCW |
Seal Material | EPDM |
Screw Material | Stainless Steel |
GPM of Water @ 2 Ft. of Head | 11.2 |
GPM of Water @ 1 Ft. of Head | 11.75 |
Min. GPM @ Head | 1 gpm @ 18.25 ft |
Duty | Continuous |
Inlet Pressure | 75 psi |
Bearing Type | Ceramic |
GPM of Water @ 15 Ft. of Head | 5.5 |
Hz | 50/60 |
Flow Rate @ 1 ft of Head (Maximum) | 11.75 gpm |
Ambient Temperature (Maximum) | 140 Degrees F |
Compatible Motor Frame | 56J NEMA |
Overall Height | 4.9 in |
Overall Width | 4.3 in |
Current | 0.56 A |
Impeller Design | Semi-Open |
Best Efficiency Head | 2.62 ft |
Duty Cycle | Continuous |
Nameplate Voltage | 115V AC |
Frequency | 60 Hz |
Discharge Port | 3/4 in |
Intake Pipe Size | 3/4 in |
Wetted Material | 316 Stainless Steel, Carbon, EPDM, Noryl, Viton |
Flow Rate (Maximum) | 11.6 gpm |
Cord Length | 4 ft |
Media Temperature (Maximum) | 140 Degrees F |
Feet of Head (Maximum) | 18.7 ft |
Flow Rate (Minimum) | 1 gpm |
Case Pressure (Maximum) | 200 psi |
Shut Off Pressure (Maximum) | 29 psi |
Flow Rate @ 15 ft of Head (Maximum) | 5.5 gpm |
Best Efficiency Flow | 11 gpm |
Motor Speed (Maximum) | 3,100 RPM |
Viscosity (Maximum) | 30 cps |
Flow Rate @ 10 ft of Head (Maximum) | 8 gpm |
Discharge Pipe Size | 3/4 in |
Overall Length | 6 in |
Flow Rate @ 5 ft of Head (Maximum) | 10 gpm |
Suction Port | 3/4 in |
Horsepower (Maximum) | 1/25 hp |
Solid Diameter (Maximum) | 0.75 in |
Country of Origin (subject to change) | Hungary |
Package Quantity | 1 |
1/25 HP Noryl/Aluminum Centrifugal Pump 115V 3/4" T, GOULDS WATER TECHNOLOGY, Mfr# E10-NSTNDNN1W-19
$267,99
-$7.07 / ea
with subscription
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 3/4 in, Feet of Head (Maximum) 18.7 ft, Flow Rate (Maximum) 11.6 gpm, Horsepower (Maximum) 1/25 hp, Housing Material Aluminum, Noryl, Impeller Design Semi-Open, Impeller Material 316 Stainless Steel, Nylon, Intake Pipe Size 3/4 in, Media Temperature (Maximum) 140 Degrees F, Phase Single, Shut Off Pressure (Maximum) 29 psi, Viscosity (Maximum) 30 cps, Flow Rate @ 10 ft of Head (Maximum) 8 gpm, Flow Rate @ 15 ft of Head (Maximum) 5.5 gpm
9999 in stock
Must order in multiples of 1
Subtotal:
$267.99
You must be logged in to post a review.
Reviews
There are no reviews yet.