Item | Rigid Shaft Coupling |
Shaft Locking Type - Couplings | 1 Piece Clamp |
System of Measurement | Inch |
Bore Dia. | 3/8 in |
Material - Couplings | 303 Stainless Steel |
Outside Dia. | 7/8 in |
Overall Length | 1 3/8 in |
With Keyway / Without Keyway | With Keyway |
Finish | Bright |
Clearance Dia. | 1.033 in |
Material | 303 Stainless Steel |
Max. Torque (In.-Lbs.) | 145 |
Machined From | Bar Stock |
Max. Torque | 145 in-lb |
Provides | Extra Holding Power for Higher Load Applications without Marring Shafts |
Screw Size | #6-32 |
Keyway Width | 3/32 in |
Type | One Piece Clamp Type, with Keyway |
Item - Rigid Shaft Couplings | Rigid Shaft Coupling |
Clearance Dia. (In.) | 1.033 |
Standards | ANSI, Conflict Minerals Compliant, REACH Compliant, RoHS3 Compliant |
Application | For Applications where Alignment is Critical, Particularly when no Backlash is Desired and Flexibility is not Required, Useful when Timing, Joining and/or Aligning Shafts at Lower Speeds and Torque |
Keyway Width (In.) | 3/32 |
Screw Size (In.) | #6-32 |
Design | Four Vibration Resistant Socket Capscrews |
Screw Material | Stainless Steel |
Bore Tolerance | +0.0020 in / +0.0005 in |
Zero Backlash | Yes |
Screw Thread Size | #6-32 |
Features | Precision Honed Bores, Vibration-Resistant Screws |
Recommended Gap | Not Applicable |
Screw Material Grade | 18-8 300 Series |
Minimum Operating Temperature | -40 Degrees F |
Bore Diameter 1 | 3/8 in |
Bore Type | Round Keyed |
Coupling Outside Diameter | 7/8 in |
Fastener Tightening Torque | 15 lb-in |
Bore Diameter 2 | 3/8 in |
Keyway Depth 1 | 3/64 in |
Keyway Width 1 | 3/32 in |
Clearance Diameter | 1.03 in |
Screw Location from Center | 0.313 in |
Coupling Material Finish | Bright |
Keyway Width 2 | 3/32 in |
Number of Locking Screws | 4 |
Included Screws | (4) Clamp Screws |
Coupling Material Grade | 303 |
Maximum Bore Diameter | 3/8 in |
Maximum Torque | 145 in-lb |
Keyway Depth 2 | 3/64 in |
Minimum Bore Diameter | 3/8 in |
Coupling Construction | One-Piece |
Shaft Tolerance | +0.0000 in / -0.0005 in |
Resistance Properties | Corrosion Resistant |
Screw Material Finish | Bright |
Shaft Locking Type | Clamp On |
Coupling Material | Stainless Steel |
Maximum Operating Temperature | 350 Degrees F |
Maximum Speed | 4,000 RPM |
Different Bore Sizes | No |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Coupling, One Piece, Bore Dia 3/8 In, RULAND, Mfr# CLC-6-6-SS
$75,99
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Rigid Shaft Coupling, Bore Diameter 1 3/8 in, Bore Diameter 2 3/8 in, Bore Type Round Keyed, Clearance Diameter 1.03 in, Coupling Construction One-Piece, Coupling Material Stainless Steel, Coupling Outside Diameter 7/8 in, Different Bore Sizes No, Keyway Depth 1 3/64 in, Keyway Depth 2 3/64 in, Minimum Bore Diameter 3/8 in, Keyway Width 1 3/32 in, Keyway Width 2 3/32 in, Maximum Bore Diameter 3/8 in, Maximum Speed 4,000 RPM, Maximum Torque 145 in-lb, Overall Length 1 3/8 in
9999 in stock
Must order in multiples of 1
Subtotal:
$75.99
You must be logged in to post a review.
Reviews
There are no reviews yet.