| Item | Rigid Shaft Coupling |
| Shaft Locking Type - Couplings | 1 Piece Clamp |
| System of Measurement | Metric |
| Bore Dia. | 8 mm |
| Material - Couplings | 303 Stainless Steel |
| Outside Dia. | 24 mm |
| Overall Length | 35 mm |
| With Keyway / Without Keyway | Without Keyway |
| Finish | Bright |
| Material | 303 Stainless Steel |
| Clearance Dia. | 27.1 mm |
| Screw Size | M3 |
| Max. Torque (In.-Lbs.) | 210 |
| Screw Size (mm) | M3 |
| Design | Four Vibration Resistant Socket Capscrews |
| Machined From | Bar Stock |
| Type | One Piece Clamp Type, Without Keyway |
| Application | For Applications where Alignment is Critical, Particularly when no Backlash is Desired and Flexibility is not Required, Useful when Timing, Joining and/or Aligning Shafts at Lower Speeds and Torque |
| Clearance Dia. (mm) | 27.10 |
| Max. Torque | 210 in-lb |
| Provides | Extra Holding Power for Higher Load Applications without Marring Shafts |
| Item - Rigid Shaft Couplings | Rigid Shaft Coupling |
| Standards | Conflict Minerals Compliant, DIN 912 12.9 Screws, REACH Compliant, RoHS3 Compliant |
| Bore Tolerance | +0.050 mm / +0.012 mm |
| Screw Material | Stainless Steel |
| Clearance Diameter | 27.1 mm |
| Minimum Bore Diameter | 8 mm |
| Shaft Tolerance | +0.000 mm / -0.013 mm |
| Bore Diameter 1 | 8 mm |
| Different Bore Sizes | No |
| Number of Locking Screws | 4 |
| Coupling Material Grade | 303 |
| Keyway Width 2 | Not Applicable |
| Coupling Outside Diameter | 24 mm |
| Recommended Gap | Not Applicable |
| Coupling Construction | One-Piece |
| Bore Diameter 2 | 8 mm |
| Screw Location from Center | 9 mm |
| Coupling Material | Stainless Steel |
| Coupling Material Finish | Bright |
| Fastener Tightening Torque | 1.1 N-m |
| Screw Material Finish | Bright |
| Keyway Width 1 | Not Applicable |
| Screw Material Grade | 18-8 300 Series |
| Maximum Torque | 16 N-m |
| Maximum Speed | 4,000 RPM |
| Features | Precision Honed Bores, Vibration-Resistant Screws |
| Resistance Properties | Corrosion Resistant |
| Zero Backlash | Yes |
| Keyway Depth 2 | Not Applicable |
| Maximum Operating Temperature | 176 Degrees C |
| Shaft Locking Type | Clamp On |
| Maximum Bore Diameter | 8 mm |
| Bore Type | Round |
| Keyway Depth 1 | Not Applicable |
| Included Screws | (4) Clamp Screws |
| Screw Thread Size | M3 |
| Minimum Operating Temperature | -40 Degrees C |
| Country of Origin (subject to change) | United States |
| Package Quantity | 1 |
Coupling, One Piece, Bore Dia 8 mm, RULAND, Mfr# MCLX-8-8-SS
$58,99
Free shipping will be applied on orders over $50
Rigid Shaft Coupling, Bore Diameter 1 8 mm, Bore Diameter 2 8 mm, Bore Type Round, Clearance Diameter 27.1 mm, Coupling Construction One-Piece, Coupling Material Stainless Steel, Coupling Outside Diameter 24 mm, Different Bore Sizes No, Keyway Depth 1 Not Applicable, Keyway Depth 2 Not Applicable, Minimum Bore Diameter 8 mm, Keyway Width 1 Not Applicable, Keyway Width 2 Not Applicable, Maximum Bore Diameter 8 mm, Maximum Speed 4,000 RPM, Maximum Torque 16 N-m, Overall Length 35 mm
9999 in stock
Must order in multiples of 1
Subtotal:
$58.99
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.