| Item | Linear Ball Bearing |
| Type | Open |
| Bore Dia. | 0.625 in |
| Outside Dia. | 1 1/8 in |
| Material | Delrin |
| Dynamic Load Capacity (Lb.) | 620 |
| Accelerated Speed | 450 fps |
| Length (In.) | 1 1/2 in |
| Steady State Speed | 10 fps |
| Dimension C | 1.5 in |
| Dimension G | 0.130 in |
| Self-Alignment | Self-Aligning |
| Retention Hole Location | 0.13 in |
| Required Housing Bore Dia. (In.) | 1.125 in |
| Retention Hole Dia. (mm) | 0.11 in |
| Dimension C1 | 1.125 in |
| Dimension F | 0.11 in |
| Between Grooves (mm) | 1.125 in |
| Temp. Range (F) | 0 - 185 |
| For Use With | Thomson Shafting |
| Dimension T | 0.625 |
| Inside Dia. Tolerance | +/-.001 |
| Slot Width (In.) | 0.34 in |
| Slot Angle (Degrees) | 30 Degrees |
| Dynamic Load Capacity (N) | 620 lbf |
| Series | Super Smart |
| Brand & Series | THOMSON Super Smart |
| System of Measurement | Inch |
| Inside Dia. | 5/8 in |
| Included Wiper Seals | Two Integral Wipers |
| Maximum Operating Temperature | 185 Degrees F |
| Operating Temperature Range | 185 Degrees F |
| Country of Origin (subject to change) | Mexico |
| Package Quantity | 1 |
Ball Bushing, Bore Dia 0.625 In, THOMSON, Mfr# SSU10OPNWW
$64,19
Free shipping will be applied on orders over $50
Linear Ball Bearing, Type Open, Inside Dia. 5/8 in, Outside Dia. 1 1/8 in, Material Delrin, Accelerated Speed 450 fps, Between Grooves (mm) 1.125 in, Dimension B -, Dimension C 1.5 in, Dimension C1 1.125 in, Dimension C2 -, Dimension d -, Dimension E -, Dimension F 0.11 in, Dimension G 0.130 in, Dimension T 0.625, Dynamic Load Capacity (N) 620 lbf, For Use With Thomson Shafting, Inside Dia. Tolerance +/-.001, Maximum Operating Temperature 185 Degrees F, Outside Dia. Tolerance -
9999 in stock
Must order in multiples of 1
Subtotal:
$64.19
Analogues
You must be logged in to post a review.
Reviews
There are no reviews yet.