Item | Blower |
Type | Direct Drive Forward Curve |
Wheel Dia. (In.) | 6 in |
Voltage | 230/460 |
Motor HP | 1/4 hp |
Motor Type | General Duty, Three Phase |
Includes | Motor Mounting Base |
Depth (In.) | 13.75 in |
Agency Compliance | AMCA and CSA certified, UL Listed |
Wheel Type | Forward-Curved |
Motor Enclosure | Totally Enclosed Fan Cooled |
Motor RPM | 3,450 RPM |
Wheel Material | Plastic |
Width (In.) | 8.64 in |
Housing Material | Plastic |
Full Load Amps | .70/.035 |
Max. Ambient Temp. (F) | -13 Degrees F |
CFM @ 2.000-In. SP | 90 |
Inlet Dia. (In.) | 2.95 in |
Max. Inlet Temp. (Deg. F) | 140 Degrees F |
Hz | 50/60 Hz |
Blower RPM | 3,450 RPM |
Height (In.) | 17.97 in |
dBA @ 5 Feet | 74 dBA |
CFM @ 1.500-In. SP | 100 |
CFM @ 0.750-In. SP | 75 |
Outlet Dia. (In.) | 2.95 in |
Material | Plastic Wheel & Plastic Housing |
Wheel Width (In.) | 1.88 in |
Phase | 3 |
Bearing Type | Sealed, Permanently Lubricated Ball |
Shaft Dia. (In.) | 9 mm |
Housing Finish | Polypropylene |
CFM @ 0.500-In. SP | 70 |
Rotation | CCW |
CFM @ 1.250-In. SP | 90 |
CFM @ 1.000-In. SP | 90 |
Motor Frame | 56 |
Current | 0.7/0.035 A |
Motor Enclosure Design | Totally Enclosed Fan-Cooled (TEFC) |
For Fan Speed (Dependent on Motor) | 3,450 RPM to 3,450 RPM |
Flange Size | Not Applicable |
Airflow @ 0.750 in SP | 75 cfm |
Includes Drive Package | Yes |
Maximum Static Pressure | 2 1/2 in wc |
Airflow @ 1.500 in SP | 100 cfm |
Corrosion Resistant | Yes |
Motor Frame Designation | 56 |
Minimum Ambient Temperature | -40 Degrees C |
Number of Inlets | 1 |
Airflow @ Static Pressures | 90 cfm @ 1.000 in SP / 100 cfm @ 1.500 in SP |
Motor Speed | 3,450 RPM |
Wheel Dimensions | 6 in Dia. x 1 7/8 in W |
Includes Mounting Hardware | Yes |
Includes Motor | Yes |
Outlet Size | 2 7/8 in diameter |
Housing Width | 8 5/8 in |
Outlet Diameter | 2 15/16 in |
Outlet Height | Not Applicable |
Airflow @ 0.500 in SP Range | 0 to 999 cfm |
Wheel Diameter | 6 in |
Overall Depth | 13 3/4 in |
Flange Type_broad | Outlet |
Airflow @ 2.000 in SP | 90 cfm |
Frequency | 50/60 Hz |
Airflow @ 1.250 in SP | 90 cfm |
Airflow @ 1.000 in SP | 90 cfm |
Sound Level | 74 dBA @ 5 ft |
Maximum Fan Speed | 3,450 RPM |
Airflow @ 1.500 in SP Range | 0 to 999 cfm |
Mounting Orientation | Multiposition |
Thermal Overload Protection | Yes |
Nameplate Voltage | 230/460V AC |
Assembly | Assembled |
Outlet Width | Not Applicable |
Overall Width | 8 5/8 in |
Maximum Ambient Temperature | -13 Degrees F |
Shaft Diameter | 9 mm |
Outlet Shape | Round |
For Air Type | Contaminated, Damp, Dirty and Dusty, Emergency Smoke Control, Clean Air, High Temperature |
Discharge Position | Bottom Horizontal, Down Blast, Top Horizontal, Up Blast |
Inlet Type | Single-Inlet |
Minimum Fan Speed | 3,450 RPM |
Wheel Width | 1 7/8 in |
Inlet Diameter | 2 15/16 in |
Outlet Shape_broad | Round |
Drive Type | Direct Drive |
Nominal Voltage | 230/460V AC |
Flange Type | Non-Flanged |
Housing Height | 17 15/16 in |
Standards | AMCA Certified, CSA Certified, UL Listed |
Maximum Inlet Air Temperature | 140 Degrees F |
Airflow @ 0.500 in SP | 70 cfm |
Motor Enclosure Design_Table | Totally Enclosed Motor |
Overall Height | 17 15/16 in |
Number of Discharge Positions | 2 |
Motor Horsepower | 4/25 hp |
Mount Type | Motor Mount |
Country of Origin (subject to change) | United States |
Package Quantity | 1 |
Blower, Forward Curve, 6 in, PLASTEC, Mfr# S10ST2P016
$1236,99
Free shipping will be applied on orders over $50
Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Yes, Assembly Assembled, Wheel Diameter 6 in, Airflow @ 0.500 in SP 70 cfm, Airflow @ 0.750 in SP 75 cfm, Airflow @ 1.000 in SP 90 cfm, Airflow @ 1.250 in SP 90 cfm, Airflow @ 1.500 in SP 100 cfm, Airflow @ 2.000 in SP 90 cfm
9999 in stock
Must order in multiples of 1
Subtotal:
$1236.99
You must be logged in to post a review.
Reviews
There are no reviews yet.