Item | Chemical Resistant Centrifugal Pump |
HP | 1 hp |
Housing Material | 316 Stainless Steel |
Phase | Single |
Voltage | 115/230 |
Max. GPM @ Head | 90 gpm @ 5 ft |
Max. Head | 65 ft |
Inlet | 1-1/2 in NPT |
Best Efficiency GPM @ Head | 48 gpm @ 40 ft |
Outlet | 1-1/4 in NPT |
Motor Enclosure | Totally Enclosed Fan Cooled |
Application | Chemical Processing, Circulating, Cooling, Liquid Transfer, Pressure Boosting, Recirculation |
Port Rotation | 90 Degrees Increments |
Max. Case Pressure | 150 psi |
Max. Liquid Temp. | 300 Degrees F |
Max. Dia. Solids | 1/8 in |
Motor RPM | 3,450 RPM |
Width | 9 1/4 in |
Duty | Continuous |
Impeller Material | 316 Stainless Steel |
Max. Fluid Viscosity | 260 SUS |
GPM of Water @ 40 Ft. of Head | 48 |
Height | 7 7/8 in |
Drain Plug | No |
GPM of Water @ 30 Ft. of Head | 57 |
Shaft Material | Stainless Steel |
Wetted Materials | 316 Stainless Steel, Carbon, Ceramic, Viton |
GPM of Water @ 50 Ft. of Head | 24 |
Inlet Pressure | 121 psi |
Hz | 60 |
Manufacturers Warranty Length | 1 yr |
Motor Type | Capacitor Start Capacitor Run |
GPM of Water @ 25 Ft. of Head | 70 |
Bearing Type | Ball |
Screw Material | Stainless Steel |
Seal Material | Carbon, Ceramic, Stainless Steel, Viton |
GPM of Water @ 60 Ft. of Head | 8 |
NEMA/IEC Frame | 56J |
Max. Specific Gravity | 1.0 |
Impeller Type | Closed |
GPM of Water @ 20 Ft. of Head | 77 |
Agency Compliance | CUS |
Min. GPM @ Head | 8 gpm @ 60 ft |
Includes | Manual |
GPM of Water @ 5 Ft. of Head | 90 |
Best Efficiency Range GPM @ Head | 66 to 21 gpm @ 20 to 50 ft |
GPM of Water @ 10 Ft. of Head | 84 |
Service Factor | 1.3 |
Amps | 13.0/6.5 |
GPM of Water @ 15 Ft. of Head | 79 |
Length | 12 15/16 in |
Seal Type | Mechanical |
Volute Material | 316 Stainless Steel |
Overall Length | 12.9 in |
Overall Width | 9.3 in |
Overall Height | 7.9 in |
Standards | CUS |
Ambient Temperature (Maximum) | 104 Degrees F |
Intake Pipe Size | 1 1/2 in |
Discharge Pipe Size | 1 1/4 in |
Discharge Pipe Type | NPT |
Flow Rate @ 25 ft of Head (Maximum) | 56 gpm |
Flow Rate @ 1 ft of Head (Maximum) | 82 gpm |
Flow Rate @ 30 ft of Head (Maximum) | 48 gpm |
Discharge Rotation | 90 Degrees Increments |
Shut Off Pressure (Maximum) | 150 psi |
Shaft Outer Diameter | 7/16 in |
Flow Rate @ 70 ft of Head (Maximum) | Not Applicable |
Case Pressure (Maximum) | 150 psi |
Current | 13 or 6.5 A |
Viscosity (Maximum) | 260 SUS |
Specific Gravity (Maximum) | 1 |
Best Efficiency Flow | 48 gpm |
Feet of Head (Maximum) | 65 ft |
Flow Rate @ 20 ft of Head (Maximum) | 65 gpm |
Solid Diameter (Maximum) | 0.13 in |
Flow Rate @ 5 ft of Head (Maximum) | 79 gpm |
Nameplate Voltage | 115/230V AC |
Media Temperature (Maximum) | 300 Degrees F |
Flow Rate (Maximum) | 90 gpm |
Discharge Port | 1 1/4 in NPT |
Compatible Motor Frame | 56J NEMA |
Flow Rate @ 15 ft of Head (Maximum) | 70 gpm |
Suction Port | 1 1/2 in NPT |
Best Efficiency Head | 40 ft |
Media Temperature (Minimum) | 40 Degrees F |
Impeller Design | Closed |
Electrical Connection Type | Not Applicable |
Motor Speed (Maximum) | 3,450 RPM |
Flow Rate @ 40 ft of Head (Maximum) | 26 gpm |
Frequency | 60 Hz |
Priming | Manual |
Horsepower (Maximum) | 1 hp |
Flow Rate @ 60 ft of Head (Maximum) | 3 gpm |
For Use With Potable Systems | No |
Duty Cycle | Continuous |
Flow Rate @ 10 ft of Head (Maximum) | 75 gpm |
Wetted Material | 316 Stainless Steel, Carbon, Ceramic, Viton |
Flow Rate @ 80 ft of Head (Maximum) | Not Applicable |
Intake Pipe Type | NPT |
Cord Length | Not Applicable |
Flow Rate (Minimum) | 8 gpm |
Ambient Temperature (Minimum) | 40 Degrees F |
Country of Origin (subject to change) | China |
Package Quantity | 1 |
Pump, Centrifugal, SS, 1 HP, 1 PH, DAYTON, Mfr# 5WXT4
$1040,99
-3% / ea
with subscription
Free shipping will be applied on orders over $50
Centrifugal Pump, Discharge Pipe Size 1 1/4 in, Discharge Pipe Type NPT, Feet of Head (Maximum) 65 ft, Flow Rate (Maximum) 90 gpm, Horsepower (Maximum) 1 hp, Housing Material 316 Stainless Steel, Impeller Design Closed, Impeller Material 316 Stainless Steel, Intake Pipe Size 1 1/2 in, Intake Pipe Type NPT, Media Temperature (Maximum) 300 Degrees F, Phase Single, Shut Off Pressure (Maximum) 150 psi, Viscosity (Maximum) 260 SUS, Flow Rate @ 10 ft of Head (Maximum) 75 gpm
0 in stock
Must order in multiples of 1
Subtotal:
$1040.99
You must be logged in to post a review.
Reviews
There are no reviews yet.