Item | Submersible Pump Motor |
Phase | Single |
HP | 1/3 |
Voltage | 230V AC |
Number of Wires | 2 |
RPM Range | 1,725-3,450 |
Motor Service Factor | 1.15 |
Motor Bearings | Kingsbury |
Nameplate RPM | 3,450 |
Motor Shaft Rotation | CCW |
Motor Sub Application | Water Wells |
Max. SF Amps | 4.6 |
Motor Thermal Protection | Built-In Lightning Arrestor |
Full Load Amps | 4.0 |
Overload Relay Amp Setting | 10.0 A |
Stator Type | Hermetically Sealed |
Starter Required | No |
Standards | ANSI/NSF 61 |
Motor Enclosure Design | Hermetically Sealed |
Overload Relay Required | No |
Max. Ambient Temp. | 86 Degrees F |
Hz | 60 Hz |
Thrust Rating | 300 lb |
Diaphragm Type | Pressure Equalizing |
Overload Relay Max. Amp Setting | 12 A |
Shaft Material | Nitrile Rubber |
Height | 10 1/4 in |
Motor Application | Pumps |
Motor Design | Split-Phase |
Lead Length | 4 ft |
Nominal Efficiency | 51 % |
Frame | Not Applicable |
Conduit Box Location | Not Applicable |
Body Dia. | 3.8 in |
Conduit Box Position | Not Applicable |
Inverter Rated | No |
Shaft Length | 9 1/2 in |
Motor Shaft Design | Splined |
Ring to Ring Center | Not Applicable |
Overall Length | 8 3/4 in |
No. of Speeds | Not Applicable |
Length Less Shaft | 8 3/4 in |
Finish | Not Applicable |
Shaft Dia. | 5/8 in |
Motor Frame Material | Stainless Steel |
Inverter Rating | Not Applicable |
CC Number | Not Applicable |
Bolt Circle Dia. | 2 7/8 in |
Bearing Protection | Not Applicable |
Ins. Class | B |
Includes | Not Applicable |
Motor Mounting Type | NEMA Pump Mounting |
Part Winding Start Capable | No |
Duty Cycle | Continuous |
Resilient Ring Dia. | Not Applicable |
Weight | 17 lb |
NEMA Design | Not Applicable |
Motor Mounting Position | Vertical Shaft Up |
Regreasable Bearings | Not Applicable |
Manufacturers Warranty Length | 1 yr |
Country of Origin (subject to change) | Mexico |
Package Quantity | 1 |
Pump Motor, 4A Full Load, 9-1/2" Shaft L, LITTLE GIANT PUMP, Mfr# 2445039004GS
$537,99
Free shipping will be applied on orders over $50
Submersible Pump Motor, Bearing Protection Not Applicable, Body Dia. 3.8 in, Bolt Circle Dia. 2 7/8 in, CC Number Not Applicable, Conduit Box Location Not Applicable, Conduit Box Position Not Applicable, Diaphragm Type Pressure Equalizing, Duty Cycle Continuous, Finish Not Applicable, Frame Not Applicable, Hz 60 Hz, Full Load Amps 4.0, Height 10 1/4 in, HP 1/3, Includes Not Applicable, Ins. Class B, Inverter Rated No, Inverter Rating Not Applicable, Lead Length 4 ft, Length Less Shaft 8 3/4 in
0 in stock
Must order in multiples of 1
Subtotal:
$537.99
You must be logged in to post a review.
Reviews
There are no reviews yet.